What is the procedure for GLC 43 SUV oil change?

Procedure for GLC 43 SUV Oil Change

Performing regular oil changes is crucial to maintaining the performance and longevity of your GLC 43 SUV. This article will guide you through the step-by-step procedure for an oil change, ensuring that your vehicle continues to run smoothly and efficiently.

Tools and Materials Required:

• Oil filter
• Engine oil (Refer to your vehicle's specifications)
• Oil drain pan
• Socket set and wrench
• Oil filter wrench
• Oil filter drain tool (if necessary)
• Funnel
• Ratchet
• Shop towels

Step 1: Preparation

Start by gathering all the necessary tools and materials listed above. It is recommended to perform the oil change on a level surface with the engine at operating temperature. Ensure you have enough time available to complete the procedure without rushing.

Step 2: Raise the Vehicle

With a floor jack, carefully lift the GLC 43 SUV and support it with jack stands to ensure stability and safety during the oil change. Locate the designated jack points beneath the vehicle to avoid any damage to the undercarriage.

Step 3: Locate and Remove Drain Plug

Crawling underneath the vehicle, locate the oil drain plug on the oil pan. Position an oil drain pan underneath the drain plug to catch the old oil. Using a socket set and wrench, carefully loosen the drain plug in a counterclockwise direction. Allow the old oil to completely drain into the pan.

Step 4: Remove the Old Oil Filter

Next, locate the oil filter, which is usually found near the oil pan. Use an oil filter wrench to loosen the old oil filter in a counterclockwise direction. Once loose, unscrew and remove the filter carefully. Ensure the oil drain pan is positioned under the filter to catch any residual oil.

Step 5: Install the New Oil Filter

Take the new oil filter and apply a thin layer of new engine oil to the gasket. This helps create a proper seal and prevents leakage. Screw the new filter into place, tightening it by hand until snug. Avoid over-tightening, as it can cause damage and make future removal difficult.

Step 6: Replace the Drain Plug

Once the old oil has drained completely, clean the drain plug and its gasket thoroughly. Ensure no debris is present before reattaching it to the oil pan. Tighten the drain plug in a clockwise direction using a socket set and wrench. Exercise caution to avoid overtightening, which can strip the threads.

Step 7: Add New Engine Oil

Locate the oil filler cap on top of the engine. Remove it and place a funnel securely into the opening. Refer to your vehicle's specifications to determine the recommended engine oil type and quantity. Slowly pour the new oil into the engine, periodically checking the dipstick to ensure you do not overfill.

Step 8: Verify Oil Level and Clean Up

Once you have added the proper amount of oil, remove the funnel and securely tighten the oil filler cap. Start the engine and allow it to run for a few minutes, then turn it off. Check the oil level using the dipstick, ensuring it falls within the designated safe zone. Clean up any spilled oil and wipe any excess oil from the engine and surrounding components using shop towels.

Step 9: Dispose of Oil Responsibly

Used oil is considered hazardous waste and should not be disposed of incorrectly. Collect the old oil from the drain pan and transfer it into a suitable container. Seal the container tightly and take it to a designated oil recycling or disposal facility in accordance with local regulations.

Step 10: Lower the Vehicle

Once the oil change is complete and the used oil has been properly disposed of, it's time to lower the GLC 43 SUV back to the ground. Carefully remove the jack stands and lower the vehicle using the floor jack. Ensure no tools or equipment are left under the vehicle before operating it.

Performing regular oil changes as recommended by the manufacturer will help maintain the high performance and reliability of your GLC 43 SUV. By following this comprehensive oil change procedure, you can ensure the health and longevity of your vehicle's engine.