What are the steps to program frequency 8113.5 on a Furuno FSS1503 Single Sideband Radio Telephone? [Furuno]

What are the steps to program frequency 8113.5 on a Furuno FSS1503 Single Sideband Radio Telephone?

Subject: Furuno - Sub Subject: Single Sideband
Date: 3/17/2023 Status: ACTIVE

Viewed

2 times.

ANSWERS Write an Answer

❝What are the steps to program frequency 8113.5 on a Furuno FSS1503 Single Sideband Radio Telephone?❞ answers. ELLIOT-WA asked first. Total 1 replies.

Davin - 3/17/2023 4:32:38 PM

To program frequency 8113.5 on a Furuno FSS1503 Single Sideband Radio Telephone, follow these steps:

Turn on the radio and select the frequency mode by pressing the "MODE" button.
Press the "FREQ" button to enter the frequency programming mode.
Use the numeric keypad to enter the desired frequency, in this case, "8113.5."
Press the "ENT" button to save the frequency.
Use the "UP" and "DOWN" arrow buttons to adjust the power output level, if necessary.
Press the "ENT" button again to save the power output level.
Use the "UP" and "DOWN" arrow buttons to select the appropriate sideband (USB, LSB, or AM) for the frequency.
Press the "ENT" button again to save the sideband selection.
Use the "UP" and "DOWN" arrow buttons to adjust the modulation level (if necessary) for the frequency.
Press the "ENT" button once more to save the modulation level.
Verify that the programmed frequency is correct by checking the display.

If you encounter any issues during the programming process, consult the Furuno FSS1503 Single Sideband Radio Telephone owner's manual or contact a qualified technician for assistance.

Furuno FSS1503 Single Sideband Radio Telephone

Did you find this helpful? like icon

Tepte.com