What is the process to reset the maintenance indicator on a Frigidaire dishwasher?

To reset the maintenance indicator on a Frigidaire dishwasher, follow these steps:1.

Power off the dishwasher

: Make sure the dishwasher is not running and there are no active cycles.2.

Locate the control panel

: Look for the control panel on the top front of your dishwasher. It usually displays the cycle and option buttons.3.

Press and hold the "Hi-Temp Wash" and "Air Dry" buttons

: Simultaneously press and hold these buttons for about 3 seconds until all the lights on the control panel illuminate.4.

Release the buttons

: Once all the lights are on, release the "Hi-Temp Wash" and "Air Dry" buttons.5.

Select the "Cancel/Drain" option

: Press the "Cancel/Drain" button to reset the maintenance indicator. This will turn off the indicator light and reset the dishwasher's maintenance cycle.6.

Wait for the dishwasher to reset

: Give the dishwasher a few moments to complete the reset process. The maintenance indicator should now be reset and ready for the next cycle.By following these steps, you can easily reset the maintenance indicator on your Frigidaire dishwasher.