What are the steps involved in an oil change for a GLC 43 SUV?

Steps Involved in an Oil Change for a GLC 43 SUV

1. Prepare necessary tools and materials:
• Oil filter
• Oil drain pan
• Wrench
• Oil filter wrench
• New oil
• Funnel
• Rubber gloves
2. First, raise the GLC 43 SUV:
• Drive the vehicle onto a car ramp or use a hydraulic jack and jack stands
• Ensure the vehicle is securely supported
3. Locate and remove the oil drain plug:
• Position the oil drain pan underneath the drain plug
• Using a wrench, loosen and remove the drain plug
• Allow the old oil to completely drain into the pan
4. Remove the old oil filter:
• Using an oil filter wrench, loosen and remove the old oil filter
• Dispose of the old filter properly
5. Install the new oil filter:
• Apply a small amount of new oil to the rubber gasket of the new oil filter
• Screw the new filter into place, ensuring it is snug but not overly tightened
6. Replace the oil drain plug:
• Clean the drain plug and reinstall it
• Tighten the drain plug securely with a wrench
7. Refill the engine with new oil:
• Consult the vehicle's manual for the recommended type and amount of oil
• Using a funnel, pour the new oil into the engine
• Check the oil level using the dipstick and add more if necessary
8. Lower the vehicle:
• Gently remove the car ramp or lower the vehicle from the jack stands
• Ensure the car is on level ground
9. Dispose of the old oil properly:
• Take the used oil and filter to a designated recycling center or an auto parts store that accepts them

Following these steps will help you successfully perform an oil change on a GLC 43 SUV, ensuring proper maintenance and longevity of your vehicle.