What are the steps for properly performing an oil change on a GLC 43 SUV?

Steps for Properly Performing an Oil Change on a GLC 43 SUV

Performing an oil change on a GLC 43 SUV is an essential maintenance task that helps keep the engine running smoothly and extends its lifespan. Follow these steps to ensure a proper oil change:

Step 1: Gather the necessary tools and materials

Before you begin, gather all the required tools and materials:

• Oil filter
• Correct type and amount of oil
• Oil pan
• Socket wrench
• Oil filter wrench
• Funnel
• Rubber gloves
• Shop towels

Step 2: Prepare the vehicle

Park your GLC 43 SUV on a level surface and engage the parking brake. Ensure the engine is cool to avoid burns and injuries.

Step 3: Drain the old oil

Locate the oil drain plug underneath the vehicle. Place the oil pan beneath the drain plug, so it catches the oil. Use a socket wrench to remove the drain plug carefully. Allow the old oil to drain completely into the pan.

Step 4: Change the oil filter

While the old oil is draining, locate the oil filter. Use an oil filter wrench to loosen and remove the old oil filter. Dispose of the old filter properly. Apply a thin layer of oil onto the rubber gasket of the new filter. Install and tighten the new filter according to manufacturer specifications.

Step 5: Replace the drain plug

Once the oil has finished draining, clean the drain plug and gasket thoroughly. Reinstall the drain plug, ensuring it is tightened securely.

Step 6: Refill with new oil

Locate the oil filler cap under the hood. Remove the cap and insert a funnel. Slowly pour the correct type and amount of new oil specified for your GLC 43 SUV. Refer to the owner's manual or consult a professional if you are unsure about the exact oil specifications.

Step 7: Check the oil level

After adding the oil, remove the funnel and securely fasten the oil filler cap. Start the engine and let it run for a few minutes. Turn off the engine and wait for a few minutes to allow the oil to settle. Use the dipstick to check the oil level. If needed, add more oil until it reaches the recommended level.

Step 8: Dispose of old oil

Properly dispose of the old oil and oil filter at an approved recycling center. Avoid pouring it down the drain or throwing it into the regular trash.

Remember to consult the owner's manual or seek professional advice for specific instructions and to ensure you are using the correct oil and filters for your GLC 43 SUV.