What measures should I follow to fix a hydraulic fault on a Kubota U55?

There are several measures you can follow to fix a hydraulic fault on a Kubota U55. Here's a step-by-step guide: 1. Inspect for visible damage: Check the hydraulic hoses, connections, and components for any signs of leaks, cracks, or breakages. Replace or repair any damaged parts. 2. Check fluid levels: Ensure that the hydraulic fluid level is sufficient. Use the appropriate dipstick or gauge to measure the fluid level. If it's low, refill it with the recommended hydraulic oil. 3. Inspect the hydraulic filters: Clogged filters can cause poor hydraulic performance. Locate the hydraulic filters and clean or replace them as necessary. 4. Bleed the hydraulic system: Air in the hydraulic lines can cause issues. To remove air, locate the bleed valves on the system and open them to let the air escape. Close the valves once the fluid starts flowing smoothly. 5. Check the hydraulic pump: If the pump is not functioning properly, it can lead to hydraulic faults. Inspect the pump for any damage or excessive wear. Replace or repair the pump if needed. 6. Check the control valves: Faulty control valves can affect the hydraulic system's performance. Inspect the valves for any signs of wear, leaks, or malfunctions. Clean or replace the valves as necessary. 7. Test the system: Once you've completed the above steps, start the machine and test the hydraulic system. Check for any abnormal noises, leaks, or performance issues. Make any further adjustments or repairs based on the observed results. By following these measures, you can address hydraulic faults on your Kubota U55, ensuring its optimal functioning.