Need tips for DIY oil change on Mercedes GLC 43 SUV?

Performing a do-it-yourself (DIY) oil change on your Mercedes GLC 43 SUV can be a cost-effective way of maintaining your vehicle and prolonging its engine's lifespan. While it may seem daunting at first, with the right tools, preparation, and guidance, you can successfully change the oil in your SUV. Follow these step-by-step instructions and essential tips to ensure a smooth oil change process:

Step 1: Gather the Necessary Tools and Materials

Before you begin, make sure you have all the required tools and materials. These typically include:

• Oil filter wrench
• Oil drain pan
• New oil filter
• New oil (check your owner's manual for the specific type and quantity)
• Oil filter gasket or o-ring
• Oil filter drain plug gasket
• Ramps or a jack and jack stands to elevate your vehicle
• A socket set
• A funnel

Step 2: Prepare Your Vehicle

Park your GLC 43 SUV on a flat surface and engage the parking brake. Ensure the engine is cool to avoid burning yourself. Position ramps properly or use a jack and jack stands to elevate the front of your vehicle for easier access to the undercarriage.

Step 3: Drain the Old Oil

Locate the oil drain plug underneath the vehicle. Use a socket wrench to loosen and remove the drain plug, allowing the old oil to drain into the oil pan. While it drains, you can also remove and replace the old oil filter using an oil filter wrench.

Step 4: Install a New Oil Filter and Drain Plug Gasket

Coat the new oil filter gasket or o-ring with a thin layer of fresh oil. Install the new oil filter and hand-tighten until snug. Additionally, apply a new drain plug gasket to the drain plug before reinstalling it and tightening it to the manufacturer's specified torque.

Step 5: Add Fresh Oil

Locate the oil filler cap on top of the engine. Remove it and insert a funnel to prevent spills. Consult your owner's manual to determine the recommended oil type and quantity for your GLC 43 SUV. Begin pouring the fresh oil into the engine, allowing it to settle before checking the oil level using the dipstick. Top up if necessary.

Step 6: Check for Leaks and Dispose of Old Oil

Before lowering your vehicle, inspect the oil drain plug and oil filter for any leaks around their respective locations. Tighten if needed. Once you're confident there are no leaks, safely lower your vehicle from the ramps or jack stands. Properly dispose of the old oil by taking it to a local recycling center or facility that accepts used oil.

Step 7: Record the Oil Change

Maintain a record of the date, mileage, and type of oil used for the oil change. This information can be valuable for future reference and tracking maintenance intervals.

Performing regular oil changes on your Mercedes GLC 43 SUV is essential for its optimal performance and longevity. By following these step-by-step instructions and utilizing the right tools, you can confidently perform a DIY oil change while saving money in the process. Remember to prioritize safety and precision throughout the entire process.

Disclaimer: It is always recommended to consult your owner's manual or seek professional assistance if you are unsure about performing your vehicle's oil change on your own.