menu icon Tepte

hidemenu icon
LOGIN
ASK ME!

Home - Appliances

Breville Bread Maker Care Cleaning instructions

Date: 4/18/2020 2:35:20 PM
Rate this:
Raiting: 5 / Total: 1
Viewed view icon 2 times.

Breville Bread Maker Care & Cleaning Instructions


Ensure the bread maker is turned OFF by pressing and holding the CANCEL button. The bread maker is OFF when the START | PAUSE button surround is no longer red. Remove the power plug from the power outlet. Allow the bread maker and all accessories to cool completely before disassembling and cleaning.


Bread Machine Stainless Steel Housing Cleaning


1. Wipe the exterior of the stainless steel housing and the LCD screen with a soft, damp cloth. A non-abrasive liquid cleanser or mild spray solution may be used to avoid build-up of stains. Apply the cleanser to the sponge, not the outer surface or LCD screen, before cleaning. Do not use a dry paper towel or cloth to clean the LCD screen, or use an abrasive cleanser or metal scouring pad to clean any part of the bread maker as these will scratch the surface.


NOTE

Never immerse the stainless steel housing in water or place in the dishwasher. Take care not to allow water or cleaning fluids to seep under the buttons or LCD screen on the control panel.


2. If over-spills such as flour, nuts, raisins etc. occur in the interior baking chamber, carefully remove them using a soft, damp cloth. Use extreme caution when cleaning the heating elements. Ensure the bread maker is completely cool then gently rub a soft, damp sponge or cloth along the length of the heating element. Do not use any type of cleanser or cleaning agent.


3. Let all surfaces dry thoroughly prior to inserting the power plug into a power outlet.


Bread Machine Cleaning the Lid


1. For thorough cleaning, the lid can be removed from the stainless steel housing. Lift open the lid completely. Holding the sides of the lid, lift straight upwards. The lid should detach from the hinge. To replace the lid, align the pivot pins on the lid with the pivot points on the hinge.

Wipe the lid, viewing window and Automatic Fruit and Nut Dispenser with a soft, damp sponge. A glass cleaner or mild detergent may be used. Do not use an abrasive cleanser or metal scouring pad as these will scratch the surface.


2. Let all surfaces dry thoroughly prior to inserting the power plug into a power outlet.


Bread Machine Cleaning the Bread Pan


1. Half fill the bread pan with warm soapy water. A nonabrasive liquid cleanser or mild spray solution may be used.

Allow to stand for 10-20 minutes.


NOTE

Do not immerse the outside of the bread pan in water as this may interfere with the free movement of the wingnut and drive shaft. Submerge and wash only the interior of the bread pan.


2. Remove the paddle and wash the inside of the bread pan with a soft cloth. Do not use an abrasive cleanser or metal scouring pad as these will scratch the non-stick coating. Ensure there is no baked-on residue or dough on the drive shaft. Rinse thoroughly.


3. Let all surfaces dry thoroughly prior to inserting into the stainless steel housing.


NOTE

−− Some discoloration may appear on and inside the bread pan over time. This is a natural effect caused by moisture and steam and will not affect the bread in any way.

−− The inside of the bread pan is coated with a high quality non-stick coating. As with any non-stick coated surface, do not use abrasive cleansers, metal scouring pads or metal utensils to clean these items as they may damage the finish.

−− Never wash the bread pan in the dishwasher.


Bread Machine Cleaning the Paddle


1. Wash the collapsible paddle and fixed paddle with warm soapy water and a soft cloth.


2. Ensure there is no baked-on residue in any of the paddle crevices, including the ‘D’ shaped hole and hinge area. If there is, soak the paddle in warm soapy water. A nonabrasive liquid cleanser or mild spray solution may be used. Allow to stand for 10-20 minutes. Use a wooden toothpick, thin wooden skewer or plastic cleaning brush to remove any bread residue from the crevices and hinge area. Failure to clean the hinge area may eventually result in the collapsible paddle not working effectively. Rinse thoroughly.


3. Let all surfaces dry thoroughly prior to inserting into the bread pan.


NOTE

We do not recommend washing the paddles in the dishwasher. To extend the life of the non-stick coating, always wash in warm soapy water. Do not use abrasive cleansers, metal scouring pads or metal utensils to clean the paddles as these items may damage the paddle surface.


Bread Machine Storage


1. Ensure the bread maker is turned OFF by pressing and holding the CANCEL button. The bread maker is OFF when the START | PAUSE button surround is no longer red. Remove the power plug from the power outlet.

2. Ensure the bread maker and all accessories are completely cool, clean and dry.

3. Place the bread pan and paddles into the interior baking chamber.

4. Ensure the lid is closed.

5. Store the appliance in an upright position standing level on its support legs. Do not store anything on top.

Ask me about:

Comments / Discussions

You must sign in to use this section.
Discussions and comments

Related images about "Breville Bread Maker Care Cleaning instructions"

Similar Questions

How do I fix H2O error code on GE dishwasher?

How do I fix H2O error code on GE dishwasher: Indicates a low water situation. If H2O only appears during 1-Hour Wash, schedule service. Feel free to run any other cycle until that update is done.

GE / Dishwasher Answers: 1 view icon 120

How do I fix 999 error code on GE dishwasher?

How do I fix 999 error code on GE dishwasher; Possible leak detected on models with “Floor Protect with Alert” feature. All others: The unit’s control needs to be reset.

GE / Dishwasher Answers: 1 view icon 21

How do I fix Leak Detected error code on GE dishwasher?

How do I fix Leak Detected error code on GE dishwasher; Possible leak is detected. The cycle will be cancelled on models with leak detection. If LEAK DETECTED is displayed, contact service.

GE / Dishwasher Answers: 1 view icon 22

How do I fix C8 error code on GE dishwasher?

How do I fix C8 error code on GE dishwasher; This display indicates that the detergent cup is blocked from opening fully. Remove obstruction (i.e. silverware, pan). Relatch door and wait 30 seconds for cup to open.

GE / Dishwasher Answers: 1 view icon 27

How do I fix C7 error code on GE dishwasher?

How do I fix C7 error code on GE dishwasher; The dishwasher’s water temperature sensor circuit has become inoperative. Disconnect the power at the circuit breaker for about 30 seconds and then reset the dishwasher.

GE / Dishwasher Answers: 1 view icon 12

How do I fix C6 error code on GE dishwasher?

How do I fix C6 error code on GE dishwasher; Water temperature is too low. Water temperature coming into the dishwasher should be at least 120 degrees F. Run the faucet adjacent to the dishwasher prior to starting the dishwasher to purge any cold water from the line. Adjust the water heater tem

GE / Dishwasher Answers: 1 view icon 13

How do I fix C5 error code on GE dishwasher?

How do I fix C5 error code on GE dishwasher; The pump out time is too short. Make sure that the water supply is turned on. Try the same cycle again. Tap on the float cover to unstick the float. This is the plastic cover that looks like an upside down cup in the front left corner of the floor of t

GE / Dishwasher Answers: 1 view icon 9

How do I fix C4 error code on GE dishwasher?

How do I fix C4 error code on GE dishwasher; Machine filled twice after a power failure. Float switch stuck or failed. Clogged drain or sump. Touch start and then cancel/reset. Tap on the float cover to unstick the float. This is the plastic cover that looks like an upside down cup in the front l

GE / Dishwasher Answers: 1 view icon 15

How do I fix C3 error code on GE dishwasher?

How do I fix C3 error code on GE dishwasher; The dishwasher will not drain. Disconnect power, reset the dishwasher.

GE / Dishwasher Answers: 1 view icon 4

How do I fix C3 error code on dishwasher?

How do I fix C3 error code on dishwasher; Disconnect power, reset the dishwasher.

GE / Dishwasher Answers: 1 view icon 7

How do I fix C2 error code on dishwasher?

How do I fix C2 error code on dishwasher; The total pump out cycle exceeds 7 minutes. Press RESET to stop the beep.

GE / Dishwasher Answers: 1 view icon 4

How do I fix C1 error code on dishwasher?

How do I fix C1 error code on dishwasher; The pump out during drain has exceeded 2 minutes. Clean the air gap. Replace or reposition the hose. Run the disposer to clean it out. If problem persists, contact service.

GE / Dishwasher Answers: 1 view icon 6

What does e4 mean on GE dishwasher?

What does e4 mean on GE dishwasher; water has been detected Fault codeE4on aGE dishwasher meanswater has been detected on the floor of the d/w.

GE / Dishwasher Answers: 1 view icon 22

How do I clear the error code on my GE dishwasher?

How do I clear the error code on my GE dishwasher; Sometimes disconnecting power to the dishwasher for 30 seconds will clear the fault, error or function code, however there are some cases when further service may be required.

GE / Dishwasher Answers: 1 view icon 7

Where is the thermal fuse in a GE dishwasher?

Where is the thermal fuse in a GE dishwasher; Some models of electronic controlled dishwashers use a thermal fuse to protest the control board. The thermal fuse is normally located on the top side of the circuit board assembly with two wires attached to it.

GE / Dishwasher Answers: 1 view icon 68

Tepte.com

tepte.com ©2021

Warning!

tepte.com is an online platform to share information and its content is created by its members. Therefore, our site is not responsible for any error happening after your actions according to the information you may find in the content.