menu icon Tepte

hidemenu icon
LOGIN
ASK ME!

Home - Electronics

ASUS ROG STRIX X470-I GAMING Motherboard BIOS Setup

Date: 4/19/2020 5:34:53 PM
Rate this:
Raiting: 5 / Total: 1
Viewed view icon 24 times.

ASUS ROG STRIX X470-I GAMING Motherboard BIOS Setup

BIOS (Basic Input and Output System) stores system hardware settings such as storage device configuration, overclocking settings, advanced power management, and boot device configuration that are needed for system startup in the motherboard CMOS. In normal circumstances, the default BIOS settings apply to most conditions to ensure optimal performance.

DO NOT change the default BIOS settings except in the following circumstances:

  • An error message appears on the screen during the system bootup and requests you to run the BIOS Setup.
  • You have installed a new system component that requires further BIOS settings or update.

Inappropriate BIOS settings may result to instability or boot failure. We strongly recommend that you change the BIOS settings only with the help of a trained service personnel.

When downloading or updating the BIOS file, rename it as RX470IGM.CAP for this motherboard.

Knowing BIOS The new ASUS UEFI BIOS is a Unified Extensible Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond the traditional keyboard-only BIOS controls to enable a more flexible and convenient mouse input. You can easily navigate the new UEFI BIOS with the same smoothness as your operating system. The term “BIOS” in this user manual refers to “UEFI BIOS” unless otherwise specified.

BIOS setup program

Use the BIOS Setup to update the BIOS or configure its parameters. The BIOS screen include navigation keys and brief onscreen help to guide you in using the BIOS Setup program.

Entering BIOS at startup

To enter BIOS Setup at startup, press <Delete> or <F2> during the Power-On Self Test (POST). If you do not press <Delete> or <F2>, POST continues with its routines.

Entering BIOS Setup after POST To enter BIOS Setup after POST:

  • Press <Ctrl>+<Alt>+<Delete> simultaneously.
  • Press the reset button on the system chassis.
  • Press the power button to turn the system off then back on. Do this option only if you failed to enter BIOS Setup using the first two options.

After doing either of the three options, press <Delete> key to enter BIOS.

  • The BIOS setup screens shown in this section are for reference purposes only, and may not exactly match what you see on your screen.
  • Ensure that a USB mouse is connected to your motherboard if you want to use the mouse to control the BIOS setup program.
  • If the system becomes unstable after changing any BIOS setting, load the default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu or press hotkey <F5>. See section 3.10 Exit Menu for details.
  • If the system fails to boot after changing any BIOS setting, try to clear the CMOS and reset the motherboard to the default value. See section 1.1.6 Jumperfor information on how to erase the RTC RAM via the Clear CMOS jumper.
  • The BIOS setup program does not support the Bluetooth devices

Please visit ASUS website for the detailed BIOS content manual.

BIOS menu screen

The BIOS Setup program can be used under two modes: EZ Mode and Advanced Mode. You can change modes from Setup Mode in Boot menu or by pressing the <F7> hotkey.

Advanced Mode

The Advanced Mode provides advanced options for experienced end-users to configure the BIOS settings. The figure below shows an example of the Advanced Mode. Refer to the following sections for the detailed configurations.

The default screen for entering the BIOS setup program can be changed. Refer to the Setup Mode item in section Boot menu for details.

asus rog strix x470-i gaming motherboard bios setup advanced mode

Menu bar

The menu bar on top of the screen has the following main items:

  • My Favorites: For saving the frequently-used system settings and configuration.
  • Main: For changing the basic system configuration
  • Ai Tweaker: For changing the overclocking settings
  • Advanced: For changing the advanced system settings
  • Monitor: For displaying the system temperature, power status, and changing the fan settings.
  • Boot: For changing the system boot configuration
  • Tool: For configuring options for special functions
  • Exit: For selecting the exit options and loading default settings

Menu items

The highlighted item on the menu bar displays the specific items for that menu. For example, selecting Main shows the Main menu items. The other items (My Favorites, Ai Tweaker, Advanced, Monitor, Boot, Tool, and Exit) on the menu bar have their respective menu items.

Submenu items

A greater than sign (>) before each item on any menu screen means that the item has a submenu. To display the submenu, select the item and press <Enter>.

Language

This button above the menu bar contains the languages that you can select for your BIOS. Click this button to select the language that you want to display in your BIOS screen.

My Favorites(F3)

This button above the menu bar shows all BIOS items in a Tree Map setup. Select frequently-used BIOS settings and save it to MyFavorites menu

Refer to section My Favorites for more information.

Q-Fan Control(F6)

This button above the menu bar displays the current settings of your fans. Use this button to manually tweak the fans to your desired settings.

Refer to section QFan Control for more information.

EZ Tuning Wizard(F11)

This button above the menu bar allows you to view and tweak the overclocking settings of your system.

Refer to section EZ Tuning Wizard for more information.

Search (F9)

This button allows you to search for BIOS items by entering its name, enter the item name to find the related item listing.

AURA (F4)

This button allows you to turn the RGB LED lighting or functional LED on or off.

  • [ON]: All AURA effects will be enabled. (Default mode)
  • [OFF]: All AURA effects will be disabled.
  • [Stealth Mode]:Functional LEDs (F-Panel) and all AURA effects will be disabled.

Scroll bar

A scroll bar appears on the right side of a menu screen when there are items that do not fit on the screen. Press the Up/Down arrow keys or <Page Up> / <Page Down> keys to display the other items on the screen.

General help

At the bottom of the menu screen is a brief description of the selected item. Use <F12> key to capture the BIOS screen and save it to the removable storage device.

Configuration fields

These fields show the values for the menu items. If an item is user-configurable, you can change the value of the field opposite the item. You cannot select an item that is notuser-configurable.

A configurable field is highlighted when selected. To change the value of a field, select it and press <Enter> to display a list of options.

Hot keys

This button contains the navigation keys for the BIOS setup program. Use the navigation keys to select items in the menu and change the settings.

Last Modified button

This button shows the items that you last modified and saved in BIOS Setup.

EZ Mode: ASUS ROG STRIX X470-I GAMING Motherboard BIOS Setup

The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance, mode and boot device priority. To access the Advanced Mode, select Advanced Mode or press the <F7> hotkeyfor the advanced BIOS settings.

To switch from Advanced Mode to EZ Mode, click EZ Mode(F7) or press the <F7> hotkey

asus rog strix x470-i gaming motherboard bios setup ez mode

The boot device options vary depending on the devices you installed to the system

ASUS ROG STRIX X470-I GAMING Motherboard BIOS Setup Q-Fan Control

The QFan Control allows you to set a fan profile or manually configure the operating speed of your CPU and chassis fans.

asus rog strix x470-i gaming motherboard bios setup q-fan control

Configuring fans manually

Select Manual from the list of profiles to manually configure your fans’ operating speed.

asus rog strix x470-i gaming motherboard bios setup configuring fans manually

To configure your fans:

  1. Select the fan that you want to configure and to view its current status.
  2. Click and drag the speed points to adjust the fans’ operating speed.
  3. Click Apply to save the changes then click Exit (ESC).Speed pointsSelect to manually configure your fans

EZ Tuning Wizard

EZ Tuning Wizard allows you to easily overclock your CPU and DRAM, computer usage, and CPU fan to their best settings.

asus rog strix x470-i gaming motherboard bios setup ez tuning wizard

OC Tuning

To start OC Tuning:

  1. Press <F11> on your keyboard or clickfrom the BIOS screen to open EZ Tuning Wizard screen.
  2. Click OCthen click Next.
  3. Select a PC scenario Daily Computing or Gaming/Media Editing, then click Next
  4. Select a Main Cooling System BOX cooler, Tower cooler, Water cooler, or I’m not sure, then click Next.
  5. After selecting the Main Cooling System, click Next then click Yes to start the OC Tuning.

My Favorites

My Favorites is your personal space where you can easily save and access your favorite BIOS items.

asus rog strix x470-i gaming motherboard bios setup my favorites

My Favorites comes with several performance, power saving, and fast boot related items by default. You can personalize this screen by adding or removing items.

Adding items to My Favorites

To add BIOS items:

  1. Press <F3> on your keyboard or click [(F3)My Favorites]from the BIOS screen to open Setup Tree Map screen.
  2. On the Setup Tree Map screen, select the BIOS items that you want to save in My Favorites screen
  3. Select an item from main menu panel, then click the submenu that you want to save as favorite from the submenu panel and click [+]or press <Enter> on your keyboard. You cannot add the following items to My Favorite items: •Items with submenu options •User-managed items such as language and boot order •Configuration items such as Memory SPD Information, system time and date
  4. Click Exit (ESC) or press <Esc> key to close Setup Tree Map screen.
  5. Go to My Favorites menu to view the saved BIOS items.

Main menu: ASUS ROG STRIX X470-I GAMING Motherboard BIOS Setup

The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings.

Security

The Security menu items allow you to change the system security settings.

  • If you have forgotten your BIOS password, erase the CMOS Real Time Clock (RTC) RAM to clear the BIOS password.
  • The Administrator or User Password items on top of the screen show the default [Not Installed]. After you set a password, these items show [Installed]

Ai Tweaker menu

The Ai Tweaker menu items allow you to configure overclocking-related items.

Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction. The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard.

Ai Overclock Tuner

Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency. Configuration options:

  • [Auto]: Loads the optimal settings for the system.
  • [Manual]: Allows you to individually set overclocking parameters.
  • [D.O.C.P.]: Allows you to select a DRAM O.C. profile, and the related parameters will be adjusted automatically.

The following item appears only when you set the Ai Overclocking Tuner to [Manual].

BCLK Frequency

This item allows you to set the BCLK frequency to enhance the system performance. Use the <+> or <-> to adjust the value.

We recommend you to set the value based on the CPU specification, as high BCLK frequencies may damage the CPU permanently.

Custom CPU Core Ratio

This item allows you to set a custom CPU core ratio. The CPU core ratio is calculated with the formula: 2 * FID / DID.

Configuration options: [Auto] [Manual]

The following items appear only when you set the Custom CPU Core Ratio to [Manual].

FID: This item allows you to set the core frequency multiplier. Use the <+> or <-> to adjust the value.

DID: This item allows you to set the core frequency divisor. Use the <+> or <-> to adjust the value.

Memory Frequency

This item allows you to set the memory operating frequency. The configurable options vary with the BCLK (base clock) frequency setting. Select the auto mode to apply the optimized setting.

Configuration options: [Auto] [DDR4-1333MHz] - [DDR4-4200MHz]

TPU: This item allows you to automatically overclock the CPU and DRAM frequencies and voltage for an enhanced system performance.

[Keep Current Settings]: Keep the current settings without changing anything.

[TPU I]: Applies air cooling overclocking conditions.

[TPU II]: Applies water cooling overclocking conditions.

Ensure to use water cooling device before selecting [TPU II].

Advanced menu

The Advanced menu items allow you to change the settings for the CPU and other system devices.

Be cautious when changing the settings of the Advanced menu items. Incorrect field values can cause the system to malfunction.

AMD fTPM configuration

The items in this menu show the AMD fTPM configuration options.

Firmware TPM: This item allows you to enable or disable AMD CPU fTPM.Configuration options: [Enable] [Disable]

When Firmware TPM is set to disabled all saved data on it will be lost.

CPU Configuration

The items in this menu show the CPU-related information that the BIOS automatically detects.

The items in this menu may vary based on the CPU installed.

PSS Support: This item allows you enable or disable the generation of ACPI_PPC, _PSS, and _PCT objects.

Configuration options: [Disabled] [Enabled] [Auto]

SVM Mode: This item allows you enable or disable CPU Virtualization.

Configuration options: [Disabled] [Enabled]

SATA Configuration

While entering Setup, the BIOS automatically detects the presence of SATA devices. The SATA Port items show Not Present if no SATA device is installed to the corresponding SATA port.

SATA Port Enable: This item allows you to enable or disable the SATA Device.

Configuration options: [Disabled] [Enabled]

SATA Mode: This item allows you to set the SATA configuration.

[AHCI]: Set to [AHCI] when you want the SATA hard disk drives to use the AHCI (Advanced Host Controller Interface). The AHCI allows the onboard storage driver to enable advanced Serial ATA features that increases storage performance on random workloads by allowing the drive to internally optimize the order of commands.

[RAID]: Set to [RAID] when you want to create a RAID configuration from the SATA hard disk drives.

NVMe RAID Mode

This item allows you to enable or disable the NVMe RAID mode.

Configuration options: [Disabled] [Enabled]

SMART Self Test

S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system that shows a warning message during POST (Power-on Self Test) when an error occurs in the hard disks.

Configuration options: [On] [Off]

SATA6G_1(Gray) - SATA6G_4(Gray)

  • SATA6G_1 - SATA6G_4: This item allows you to enable or disable the selected SATA port.Configuration options: [Disabled] [Enabled]
  • Hot Plug: These items appears only when the SATA Mode is set to [AHCI] and allows you to enable or disable SATA Hot Plug Support. Configuration options: [Disabled] [Enabled]

Onboard Devices Configuration

The items in this menu allow you to switch between PCIe Lanes and configure onboard devices.

HD Audio Controller: This item allows you to use the Azalia High Definition Audio ControllerConfiguration options: [Disabled] [Enabled]

Audio Jack LED Lighting: This item allows you to turn the RGB LED lighting for the Audio Jack LED on or off.[Disabled]: The audio jack LEDs will not light up.[Auto]: The audio jack LEDs will light up

The audio jack LEDs will light up during S0(Working), S3(Sleep), S4(Hibernation), S5(Soft off) states. The LEDs will not light up when ErP Ready is Enabled at S5 state, or S4 and S5 state

M.2_2 PCIe Bandwidth Configuration

[Auto]: Auto-detects the M.2_2 slot. If an M.2 device is detected, PCIEX16 will run at x8 mode, respectively.

[Disabled(X16 mode)]: Disable M.2_2 for PCIEX16 running on high performance. (x16)

PCIEX16 Mode

This item allows you to set the link speed for PCIEX16/X8_1 slot. Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3]

M.2_1 Link Mode

This item allows you to set the link speed for M.2_1 Device. Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3]

M.2_2 Link Mode

This item allows you to set the link speed for M.2_2 Device. Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3]

SB Link Mode

This item allows you to set the link speed for Southbridge. Configuration options: [Auto] [GEN 1] [GEN 2] [GEN 3]

RGB LED lighting

When system is in working state: This item allows you to turn the RGB LED lighting on or off when the system is in the working state. Configuration options: [On] [Off]

When system is in sleep, hibernate or soft off states: This item allows you to turn the RGB LED lighting on or off when the system is in the sleep, hibernate or soft off states.Configuration options: [On] [Off]

Intel LAN Controller

This item allows you to enable or disable the Intel LAN controllers. Configuration options: [Disabled] [Enabled]

Wi-Fi Controller

This item allows you to enable or disable the Wi-Fi controller. Configuration options: [Disabled] [Enabled]

Bluetooth Controller

This item allows you to enable or disable the Bluetooth controller. Configuration options: [Disabled] [Enabled]

APM Configuration

The items in this menu allow you to set system wake and sleep settings.

ErP Ready [Disabled]: This item allows you to switch off some power at S4+S5 or S5 to get the system ready for ErP requirement. When set to [Enabled], all other PME options are switched off.Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)]

Restore On AC Power Loss: This item allows your system to go to ON state, OFF state, or both states after an AC power loss. When setting your system to [Last State], it goes to the previous state before the AC power loss. Configuration options: [Power Off] [Power On] [Last State]

Power On By PCI-E/PCI: This item allows you to enable or disable the Wake-on-LAN function of the onboard LAN controller or other installed PCI-E LAN cards. Configuration options: [Disabled] [Enabled]

Power On By RTC: This item allows you to enable or disable the RTC (Real-Time Clock) to generate a wake event and configure the RTC alarm date. When enabled, you can set the days, hours, minutes, or seconds to schedule an RTC alarm date. Configuration options: [Disabled] [Enabled]

Network Stack Configuration

The items in this menu allow you to enable or disable the UEFI network stack

HDD/SSD SMART Information

This menu displays the SMART information of the connected devices. NVM Express devices do not support SMART information.

USB Configuration

The items in this menu allow you to change the USB-related features.

The Mass Storage Devices item shows the auto-detected values. If no USB device is detected, the item shows None

Legacy USB Support

[Enabled]: Your system supports the USB devices in legacy operating systems.

[Disabled]: Your USB devices can be used for BIOS setup only and cannot be recognized in the boot devices list.

[Auto]: Your system automatically detects the presence of USB devices at startup. If any USB devices are detected, the legacy USB support is enabled.

XHCI Hand-off

[Enabled]: Enables the support for operating systems without an XHCI hand-off feature.

[Disabled]: Disables the XHCI Hand-off support.

USB Mass Storage Driver Support

This item allows you to enable or disable USB Mass Storage Driver Support. Configuration options: [Disabled] [Enabled]

USB Single Port Control

This item allows you to enable or disable the individual USB ports.

Ask me about:

Comments / Discussions

You must sign in to use this section.
Anthony (4/19/2020 8:12:41 PM):
Do motherboards come with latest BIOS? Where can I find the latest BIOS?
Expert (4/19/2020 8:13:03 PM):

Do motherboards come with latest BIOS?
Motherboard will come with the latest BIOS from when they where built. If the motherboard has been sitting in a stock room and a new BIOS was released between when it was made and when it was purchased then it wont be the latest however manufacturers will have the latest on the site.
Where can I find the latest BIOS?
You can also find your BIOS’s version number in the System Information window. On Windows 7, 8, or 10, hit Windows+R, type “msinfo32” into the Run box, and then hit Enter. The BIOS version number is displayed on the System Summary pane. Look at the “BIOS Version/Date” field.

Mia (4/19/2020 8:09:26 PM):
How do you access BIOS on ASUS motherboard?
Expert (4/19/2020 8:10:22 PM):

ROG STRIX X470-I GAMING BIOS 3004
1. Update AM4 combo PI 1.0.0.4 patch B
2. Fixed a compatibility issue with M.2s when using Ryzen 3000 CPUs
https://www.asus.com/us/Motherboards/ROG-STRIX-X470-I-GAMING/HelpDesk_BIOS/

Related images about "ASUS ROG STRIX X470-I GAMING Motherboard BIOS Setup"

asus rog strix x470-i gaming motherboard bios setup advanced mode

asus rog strix x470-i gaming motherboard bios setup advanced mode

technician / 4/19/2020 6:07:30 PM (Original: 612X574 px)

asus rog strix x470-i gaming motherboard bios setup ez mode

asus rog strix x470-i gaming motherboard bios setup ez mode

technician / 4/19/2020 6:08:37 PM (Original: 626X650 px)

asus rog strix x470-i gaming motherboard bios setup q-fan control

asus rog strix x470-i gaming motherboard bios setup q-fan control

technician / 4/19/2020 6:09:27 PM (Original: 621X523 px)

asus rog strix x470-i gaming motherboard bios setup configuring fans manually

asus rog strix x470-i gaming motherboard bios setup configuring fans manually

technician / 4/19/2020 6:10:07 PM (Original: 616X436 px)

asus rog strix x470-i gaming motherboard bios setup ez tuning wizard

asus rog strix x470-i gaming motherboard bios setup ez tuning wizard

technician / 4/19/2020 6:11:21 PM (Original: 618X291 px)

asus rog strix x470-i gaming motherboard bios setup my favorites

asus rog strix x470-i gaming motherboard bios setup my favorites

technician / 4/19/2020 6:11:52 PM (Original: 571X431 px)

Similar Questions

How much will the PS5 cost?

What will PlayStation 5 cost, How much should the PS5 cost: PlayStation 5 Cost $500 and Release November 2020. Sony Interactive Entertainment has said when the PlayStation 5 will release

Sony / PS5 Answers: 1 view icon 3

Can I use coconut oil after epilating?

Can I use coconut oil after epilating; As a general rule, you want to work with the natural direction of hair growth. Also, make sure both the skin and tools are clean before epilating. What natural at home products are to be used after face epilation? Facial lotion, coconut oil, or baby oil are all

Braun / Silk-epil 9 Flex Answers: 1 view icon 20

Should I Epilate with or against the grain?

Should I Epilate with or against the grain; While it is important to hold the skin taut, the epilator shouldn't' be pressed down against the skin. The epilator should be used “against the grain” (against the direction of hair growth), in a slow, but steady manner. If you rush you may miss hairs or c

Braun / Silk-epil 9 Flex Answers: 1 view icon 53

Why are my legs not smooth after epilating?

Why are my legs not smooth after epilating; While it is possible, your legs will probably not be smooth when you first epilate. It really depends on your genetics, when you last shaved, and how you well you epilate. After the first couple of sessions, it's common that that you may still feel a tiny

Braun / Silk-epil 9 Flex Answers: 1 view icon 15

Can you use soap with an epilator?

Can you use soap with an epilator; Epilating makes you prone to ingrown hairs so you need to exfoliate when you epilate. But even if you do end up using a chemical exfoliation treatment, you can't cleanse the skin afterwards. So you may as well just shower beforehand.

Braun / Silk-epil 9 Flex Answers: 1 view icon 19

What means 0-n on 6th sense display

I have a 6th sense whirlpool and now it showing on the display 0-n on display and it not starting . Where it the problem

Whirlpool / 6th sens Answers: 1 view icon 146

How to use Xpress Recovery2?

GIGABYTE Motherboard using Xpress Recovery2. Xpress Recovery2 is designed to provide quick backup and restoration of hard disk data. Supporting Microsoft operating systems including Windows XP/2000/NT/98/Me and DOS, and file systems including FAT16, FAT32, and NTFS, Xpress Recovery2.

GIGABYTE / GA-990FX-Gaming Motherboard Answers: 1 view icon 21

GA-990FX-Gaming Error Codes - Motherboard

GIGABYTE GA-990FX-Gaming Motherboard Debug LED Codes: Regular Boot Codes, S3 Resume Codes, Recovery Codes, Error Codes. Learn Debug LED Codes for GA-990FX-Gaming Motherboard

GIGABYTE / GA-990FX-Gaming Motherboard Answers: 1 view icon 538

Why is Wi-Fi called 802.11? What is the best 802.11ax routers?

Does 802.11d support 5GHz? What is WiFi 802.11b G N? Why is Wi-Fi called 802.11? What is the best 802.11ax routers? Is 802.11ax backwards compatible?

ASUS / DSL-N16 xDSL Modem Router Answers: 2 view icon 6

What is the best DSL wireless modem router?

What is the best wireless modem? What is the best modem router combo? Learn Best DSL Modem, xDSL, Modem Router Combo. Best router for dsl modem, dsl modem and wireless router and best vdsl adsl modem router. What are the best modem router combo?

ASUS / DSL-N16 xDSL Modem Router Answers: 1 view icon 5

What is the Best Wi Fi router? What are the advantages of 802.11n?

Does the summit WLAN radio support 802.11n? VDR-301N Modem High-speed 802.11n Wireless Connectivity. What frequency does 802.11n use?

PLANET Modem / VDR-301N Modem Answers: 2 view icon 4

How to Deregister the LG Smart TV Magic Remote?

How to Deregister the LG Smart TV Magic Remote; Press the and (Home) buttons at the same time, for five seconds, to unpair the Magic Remote with your TV.Pressing and holding the button will let you cancel and re-register Magic Remote at once.

LG / 4K Smart OLED TV Answers: 2 view icon 104

How do I find my security key for Comcast?

How do I find my security key for Comcast? To find and/or change your network security key read this.

Comcast Xfinity / Modem Trouble Shooting Answers: 1 view icon 1783

How can I Find my Comcast account number online?

How can I find my XFINITY account number? How can I Find my Comcast account number online? Find your Comcast account number online.

Comcast Xfinity / Modem Trouble Shooting Answers: 1 view icon 4

How do I Find my Xfinity password?

Lost password Xfinity Modem. How do you find your Comcast password? How do I Change my Xfinity wireless password? How do I retrieve my Comcast password? What is the default password for Comcast routers?

Comcast Xfinity / Modem Trouble Shooting Answers: 1 view icon 145

Tepte.com

tepte.com ©2021

Warning!

tepte.com is an online platform to share information and its content is created by its members. Therefore, our site is not responsible for any error happening after your actions according to the information you may find in the content.