Installing the Fitness Tracker
1. Insert one end of the fitness tracker into the slot from the front of the wristband.
2. Press down on the other end with your thumb to push the fitness tracker into the slot completely
Wearing the Xiaomi Band
Tighten the wristband around your wrist until there is enough slack to fit about one finger, then adjust the fit until you find a comfortable position. Note: Wearing the band too loosely may impact data collection by the heart rate monitor.
Pairing the Xiaomi Band with a Smartphone
1. To download the Mi Fit app, scan the QR code below or search for "Mi Fit" on the Mi App Store or Apple Store.
2. Open the Mi Fit app, log in to your account and select "Device Pairing", then follow the pairing instructions to proceed. When the Xiaomi Band starts to vibrate and the Bluetooth pairing notification appears on the screen, press the button to complete the pairing process. Note: Please make sure Bluetooth connection is activated on your mobile phone. During the pairing process, please keep the Xiaomi Band near your mobile phone.
Using the Fitness Tracker
After the Xiaomi Band is paired successfully, it will begin to track and analyze your daily activities and sleeping habits. Touch to light up the screen.
Slide up or down on the screen to browse your activity data, measure your heart rate, and access many other features.
Slide left or right on the screen to switch the display between different items.
Removing the Fitness Tracker
Remove the wristband from your wrist, hold on to each end and pull on the wristband until you see a small gap between the fitness tracker and the wristband. Use your finger to pop the fitness tracker out of its slot from the front side of the wristband.
Charging the Xiaomi Band
Please charge your Xiaomi Band immediately when the low power indicator is on.
When using the Xiaomi Band to measure your heart rate, please keep your wrist steady.
Xiaomi Band 3 has a water resistance rating of 5ATM. It can be worn in the shower, swimming pool, or while swimming near the shore. It cannot be used, however, while sitting in a sauna or diving in the ocean.
Underwater operation is not supported for the Xiaomi Band's touch-button and touchscreen. After the Xiaomi Band has come in contact with water, please use a soft cloth to wipe away excess water from its surface before using the device.
During daily use, please do not wear the Band too tightly around your wrist and keep its contact area dry. You should also clean the wristband regularly with water. Please stop using the product immediately and seek medical assistance if the contact area on your skin begins to show signs of redness or swelling.
Name: Xiaomi Band 3
Weight of the Fitness Tracker: 8.5 g
Dimensions of the Fitness Tracker: 17.9 x 46.9 x 12 mm
Wristband material: Thermoplastic elastomer
Clasp material: Aluminum alloy
Adjustable length: 155 - 216 mm
Compatible with: Android 4.4/iOS 9.0 or later
Baery capacity: 110mAh
Battery type: Li-Ion polymer battery
Input voltage: DC 5 V
Input current: 250 mA (Max)
Max output: 0dBm
IP rating: 5ATM
Operating temperature: -10°C ~ 50°C
Wireless connectivity: Bluetooth 4.2 BLE
Ask me about:
How to reset the Xiaomi Mi band 3?
Turn on Mi fit App.
Click on the profile tab.
Go to MI band 3.
Sweep the screen several times from bottom to top.
Click Unpair button and confirm.
1. RESTART PHONE AND MI BAND
2. PAIR PROPERLY
3. UNPAIR MI BAND FROM BLUETOOTH
4. UNPAIR MI BAND FROM APP
5. CHARGE THE BAND
6. CLEAR CACHE AND DATA OF MI FIT APP
7. UPDATE MI FIT APP
8. RE-INSTALL APP
9. PAIR WITH A DIFFERENT PHONE
10. PAIR USING THIRD-PARTY APP
11. FACTORY RESET MI BAND
The Mi Band 3 is receiving much needed addition which will now let users answer calls on the connected device without touching the smartphone. Apart from calls, you can get app and call notifications on the Mi Band 3 fitness band. It also comes with motion tracking and health management, much like previous models.
Use the 20-digit security code to check any Xiaomi product. This way is suitable for any Xiaomi product, like Mi tablet, Bluetooth earphone, electric shaver, electric toothbrush and so on. The security code is located at the back of Xiaomi product's package box.
Now let's check the solutions to fix Mi Band not charging the first time or charge dead Mi Band.
Connect Properly. The main reason behind Mi Bands not charging is because of its incorrect position in the charging cable.
Keep It Connected for Some Time.
Clean Charging Pins.
Change Charging Method.
Hit Mi Band.
Steps to Reset Mi Band 2 with Android
Force stop the “'Bluetooth Share process” by going into Settings>Apps>Under Running Apps.
Remove any Data that is cached in the process.
Go to your BlueTooth settings and select the Mi band and tap “Forget Device.”
Re-open Mi Fit App and pair the device from the beginning.
Some points to check:
Quality of the box.
The tracker has logo at its back.
Charger has Flat strap and a logo is present.
The Original one will get integrated with the Mi Fit app whereas the Fake one will not.
Askme / 8/11/2020 3:34:44 AM (Original: 1280X720 px)
Askme / 8/11/2020 3:35:12 AM (Original: 840X560 px)
My Vaillant Combi Failed, How Do I Reset My Vaillant Boiler? How do you clear the fault code on a Vaillant boiler?Vaillant / Boiler Answers: 2 9
What will PlayStation 5 cost, How much should the PS5 cost: PlayStation 5 Cost $500 and Release November 2020. Sony Interactive Entertainment has said when the PlayStation 5 will releaseSony / PS5 Answers: 1 3
Can I use coconut oil after epilating; As a general rule, you want to work with the natural direction of hair growth. Also, make sure both the skin and tools are clean before epilating. What natural at home products are to be used after face epilation? Facial lotion, coconut oil, or baby oil are allBraun / Silk-epil 9 Flex Answers: 1 65
Should I Epilate with or against the grain; While it is important to hold the skin taut, the epilator shouldn't' be pressed down against the skin. The epilator should be used “against the grain” (against the direction of hair growth), in a slow, but steady manner. If you rush you may miss hairs or cBraun / Silk-epil 9 Flex Answers: 1 92
Why are my legs not smooth after epilating; While it is possible, your legs will probably not be smooth when you first epilate. It really depends on your genetics, when you last shaved, and how you well you epilate. After the first couple of sessions, it's common that that you may still feel a tinyBraun / Silk-epil 9 Flex Answers: 1 21
Can you use soap with an epilator; Epilating makes you prone to ingrown hairs so you need to exfoliate when you epilate. But even if you do end up using a chemical exfoliation treatment, you can't cleanse the skin afterwards. So you may as well just shower beforehand.Braun / Silk-epil 9 Flex Answers: 1 60
I have a 6th sense whirlpool and now it showing on the display 0-n on display and it not starting . Where it the problemWhirlpool / 6th sens Answers: 1 764
GIGABYTE Motherboard using Xpress Recovery2. Xpress Recovery2 is designed to provide quick backup and restoration of hard disk data. Supporting Microsoft operating systems including Windows XP/2000/NT/98/Me and DOS, and file systems including FAT16, FAT32, and NTFS, Xpress Recovery2.GIGABYTE / GA-990FX-Gaming Motherboard Answers: 1 22
GIGABYTE GA-990FX-Gaming Motherboard Debug LED Codes: Regular Boot Codes, S3 Resume Codes, Recovery Codes, Error Codes. Learn Debug LED Codes for GA-990FX-Gaming MotherboardGIGABYTE / GA-990FX-Gaming Motherboard Answers: 1 677
Does 802.11d support 5GHz? What is WiFi 802.11b G N? Why is Wi-Fi called 802.11? What is the best 802.11ax routers? Is 802.11ax backwards compatible?ASUS / DSL-N16 xDSL Modem Router Answers: 2 6
What is the best wireless modem? What is the best modem router combo? Learn Best DSL Modem, xDSL, Modem Router Combo. Best router for dsl modem, dsl modem and wireless router and best vdsl adsl modem router. What are the best modem router combo?ASUS / DSL-N16 xDSL Modem Router Answers: 1 6
Does the summit WLAN radio support 802.11n? VDR-301N Modem High-speed 802.11n Wireless Connectivity. What frequency does 802.11n use?PLANET Modem / VDR-301N Modem Answers: 2 4
How to Deregister the LG Smart TV Magic Remote; Press the and (Home) buttons at the same time, for five seconds, to unpair the Magic Remote with your TV.Pressing and holding the button will let you cancel and re-register Magic Remote at once.LG / 4K Smart OLED TV Answers: 2 109
How do I find my security key for Comcast? To find and/or change your network security key read this.Comcast Xfinity / Modem Trouble Shooting Answers: 1 1840