BMW 116i Oil Change Instructions

Regularly changing the engine oil is crucial for maintaining the performance and longevity of your BMW 116i. Here are step-by-step instructions on how to properly change the oil in your BMW 116i.

Step 1: Gather the necessary tools and materials

Before beginning the oil change process, make sure you have the following items:

• Oil filter
• 5-6 liters of suitable engine oil (check your vehicle's manual for the recommended type and viscosity)
• Oil filter wrench
• Oil drain pan
• Socket wrench
• Rubber gloves

Step 2: Prepare your vehicle

Park your BMW 116i on a level surface and engage the parking brake. Allow the engine to cool down for a few minutes before proceeding.

Step 3: Locate the oil drain plug

The oil drain plug is usually located underneath the engine. Consult your vehicle's manual to find the exact location.

Step 4: Position the oil drain pan

Place the oil drain pan directly under the oil drain plug to capture the old oil during the draining process.

Step 5: Remove the oil drain plug

Using a socket wrench, carefully loosen and remove the oil drain plug. Be cautious, as the oil may be hot. Allow the old oil to completely drain into the oil drain pan.

Step 6: Replace the oil filter

Locate the oil filter, which is typically situated near the oil drain plug. Use an oil filter wrench to loosen and remove the old oil filter. Make sure to catch any remaining oil that may spill out from the filter.

Step 7: Install the new oil filter

Take your new oil filter and apply a small amount of clean oil on the rubber gasket. Screw the new oil filter into place, ensuring a snug fit. Do not over-tighten.

Step 8: Replace the oil drain plug

Once the old oil has completely drained, securely tighten the oil drain plug back into place using a socket wrench. Make sure it is properly sealed to prevent oil leaks.

Step 9: Add fresh oil

Using a funnel, add the recommended amount of fresh engine oil into the oil filler cap located on top of the engine. Check your vehicle's manual for the correct oil capacity. Once filled, securely replace the oil filler cap.

Step 10: Check the oil level

Start your BMW 116i and let it run for a few minutes. Turn off the engine and wait for a minute or two, then check the oil dipstick to ensure the oil level is within the recommended range. If needed, add more oil until the level is correct.

Step 11: Properly dispose of the old oil

It is essential to dispose of the old oil responsibly. Do not pour it down the drain or throw it in the trash. You can take it to a recycling center or an auto parts store that provides oil recycling services.

By following these oil change instructions, you can effectively maintain your BMW 116i's engine health and keep it running smoothly for years to come. Regular oil changes are a simple yet vital part of proper vehicle maintenance, ensuring optimal performance and engine longevity.