Breville Cooker Fast Slow Pro Troubleshooting

Breville Cooker Fast Slow Pro Troubleshooting

1 The lid cannot be opened at the end of the cooking cycle

• Press the RELEASE button until all internal pressure is released and the lid opens easily.

• If this occurs frequently, the cooker may need to be adjusted to suit your current altitude.

2 ‘Open Lid' is displayed on the LCD when the lid is open

Turn the lid knob counter-clockwise as far as it will go. If the knob won't turn, lower the lid to about 45° and turn it clockwise then counter-clockwise.

3 Steam is escaping from the lid OR Safety locking pin does not rise OR Cooker is not getting to pressure OR Timer will not count down

• Assemble the lid correctly ensuring there is no gap between lid arm and the stainless steel lid. The sealing nut should be screwed on tightly.

• Ensure the silicone gasket is clean, free from damage or cracks and is properly inserted.

• Ensure that the safety locking pin can move freely up and down.

• When the lid is locked, ensure the safety locking pin is properly aligned within the opening of the lid arm.

• Ensure that the pressure release valve is properly seated in position and facing the lid knob.

• Add more liquid/food to the bowl. There should be a minimum of 1 quart (1 liter) combined food and liquid.

• If problem persists, call Breville Consumer Support.

4 The cooker automatically switches to keep warm without going through a complete cooking cycle

• Add more water to the cooking bowl and restart the cycle.

5 Water is collecting on the countertop

• Ensure the cooker is on a flat, level surface and that the condensation drip cup is installed on the back of the cooker.

• Empty the condensation drip cup.

The Fast Slow Cooker™ has some display codes that will appear on the LCD screen.

E0

Pressure can not be built up.

1. Check that lid is closed properly.

2. Check that the Pressure Release Valve is in the correct position.

3. Make sure the silicone rubber gasket is attached properly to the gasket holder and is securely in place on the lid.

E1

Overheating.

Unplug unit and allow to sit for 20 minutes. If no change, please call Breville Consumer Service.

E2

The bowl is not heating correctly.

Ensure the cooking bowl is properly positioned inside base. The cooking bowl must be in direct contact with the heating plate. Make sure there are no unwanted materials on the heating plate.

E3

Cooker lid is closed when SAUTÉ/SEAR has been selected.

Ensure the lid is off the appliance or placed on top to rest in an offset position when you are using the SAUTÉ/SEAR setting.

Rate this:

Raiting: 5.0 / Total: 2