Cleaning the Pump Filter in LG Washer

One important maintenance task for LG washers is to clean the pump filter regularly. Over time, the pump filter can become clogged with lint, debris, or foreign objects, which can impact the efficiency and performance of your washer. In this article, we will guide you through the process of cleaning the pump filter in your LG washer.

Step 1: Preparation

Before you begin, ensure that your LG washer is unplugged to avoid any electrical hazards. Moreover, give yourself enough space to work comfortably around the washer.

Step 2: Locating the Pump Filter

The pump filter is typically located at the front, near the bottom of the washer. Look for a small, rectangular access panel on the front of the washing machine.

Step 3: Opening the Access Panel

Once you have located the access panel, gently pry it open using a flat-head screwdriver or your fingers. Be cautious not to damage or break the panel while opening it.

Step 4: Removing the Pump Filter

Behind the access panel, you will find the pump filter. Depending on your LG washer model, the pump filter may be a screw-cap or a twist-off design. If it has a screw-cap, use a coin or a screwdriver to loosen and remove it. If it has a twist-off design, carefully turn it counterclockwise and pull it out.

Step 5: Cleaning the Pump Filter

Now that the pump filter is removed, you can begin cleaning it. Inspect the filter for any visible debris, lint, or foreign objects. Use a soft brush or toothbrush to gently scrub away the build-up. If the filter is heavily clogged, you can rinse it under running water to remove the stubborn particles.

Step 6: Reinstalling the Pump Filter

Once the pump filter is clean, carefully place it back into its original position. For screw-cap designs, tighten it by turning it clockwise. For twist-off designs, firmly push and twist it clockwise until it locks into place.

Step 7: Closing the Access Panel

Finally, gently close the access panel and make sure it is securely latched. Avoid using excessive force to prevent any damages.

Step 8: Testing

Now that you have successfully cleaned the pump filter, it's time to test your LG washer. Plug it back in, select a suitable program, and let your washer run a cycle. Ensure that there are no leaks or unusual noises during the operation. If everything appears fine, congratulations! You have completed the task successfully!

Regularly cleaning the pump filter in your LG washer will help maintain its efficiency and prolong its lifespan. Performing this simple maintenance task at least once every few months can prevent potential issues and keep your washer running smoothly.