GLC 43 SUV Oil Change Steps

Regular oil changes are vital for maintaining the performance and longevity of your Mercedes-Benz GLC 43 SUV. Here are the steps to perform a successful oil change for your vehicle:

Step 1: Gather the Necessary Tools and Materials

Before starting, gather the following items:

• Oil filter
• New oil appropriate for your vehicle
• Oil filter wrench
• Oil drain pan
• Socket set
• Ramps or a jack and jack stands to lift the vehicle
• Oil funnel
• Clean cloth

Step 2: Prepare Your Vehicle

Make sure your GLC 43 SUV is parked on a level surface. Then, switch off the engine and allow it to cool down to prevent any accidental burns during the process. Additionally, ensure you have enough space to safely work around the vehicle.

Step 3: Lift the Vehicle

If you have ramps, position them in front of the vehicle's front wheels and carefully drive the SUV up the ramps until it is elevated. If you are using a jack and jack stands, follow the manufacturer's instructions to safely lift the front of the vehicle.

Step 4: Locate and Remove the Oil Drain Plug

Locate the oil drain plug, usually located at the bottom of the engine oil pan. Place the oil drain pan beneath it. Using an appropriately sized socket, carefully loosen and remove the drain plug. Allow the old oil to drain into the pan completely.

Step 5: Replace the Oil Filter

Locate the oil filter, usually positioned near the drain plug. Use an oil filter wrench to loosen and remove the old filter. Before installing a new filter, apply a thin layer of fresh oil onto the rubber gasket of the new filter. Then, screw the new filter into place by hand, making sure not to overtighten it.

Step 6: Pour in Fresh Oil

Locate the oil filler cap, usually positioned on the top of the engine. Remove it and attach a clean funnel. Gradually pour the appropriate amount and type of new oil into the engine. Refer to your vehicle's manual or contact a certified technician to ensure you are using the correct type and volume of oil.

Step 7: Check the Oil Level and Start the Engine

After filling the engine with oil, remove the funnel and wipe any spilled oil. Screw the oil filler cap back into place securely. Next, check the oil level using the vehicle's dipstick. If necessary, add more oil to reach the optimum level. Once satisfied, start the engine and let it run for a few minutes to circulate the oil.

Step 8: Inspect for Leaks and Lower the Vehicle

After shutting off the engine, inspect the oil drain plug and oil filter for any leaks. If there are no issues, carefully lower the vehicle using ramps or by following the appropriate steps with the jack and jack stands.

Step 9: Properly Dispose of the Used Oil

Used oil is considered hazardous waste and should be disposed of properly. Take the used oil to a certified waste facility or an authorized oil recycling center to ensure it is recycled or disposed of in an eco-friendly manner.

By following these steps, you can successfully perform an oil change on your GLC 43 SUV, promoting the health and longevity of your vehicle.