Hyundai Kona Oil Change Procedure

If you own a Hyundai Kona, it is important to keep up with regular maintenance to ensure optimal performance and longevity of the vehicle. One crucial aspect of maintenance is performing regular oil changes. In this article, we will discuss the step-by-step procedure for a Hyundai Kona oil change.

Step 1: Gather the necessary materials

Before starting the oil change, make sure you have all the required materials. These may include a new oil filter, fresh oil of the recommended viscosity, a socket wrench, an oil catch pan, gloves, and a funnel.

Step 2: Prepare the vehicle

Park your Hyundai Kona on a flat and level surface. Engage the parking brake and turn off the ignition. Open the hood and locate the oil filler cap, typically located on the top of the engine.

Step 3: Drain the old oil

Position the oil catch pan underneath the oil drain plug, which is usually located on the bottom of the engine oil pan. Using a socket wrench, remove the oil drain plug carefully. Allow the old oil to completely drain into the catch pan. Once drained, carefully remove the old oil filter and dispose of it properly.

Step 4: Install a new oil filter

Apply a thin layer of oil on the rubber gasket of the new oil filter to ensure a proper seal. Then, install the new oil filter by hand, ensuring it is snug but not over-tightened.

Step 5: Add fresh oil

Locate the oil filler cap on the top of the engine and remove it. Using a funnel, pour the recommended amount and type of fresh oil into the engine. Refer to your owner's manual for the correct oil capacity and viscosity.

Step 6: Check the oil level

After adding the fresh oil, replace the oil filler cap. Start the engine and let it run for a few minutes. Turn off the engine and allow it to sit for a couple of minutes. Check the oil level using the dipstick. If needed, add more oil until it reaches the recommended level.

Step 7: Properly dispose of the old oil

It is essential to dispose of the old oil and oil filter responsibly. Many auto parts stores or service centers have recycling programs for used oil and filters. You may also consult with your local municipality for proper disposal methods.

Step 8: Record the oil change

Lastly, it is important to maintain a record of oil changes for future reference. Note down the date of the oil change, the quantity and type of oil used, and the vehicle's mileage. This documentation will help you stay on top of your Hyundai Kona's maintenance schedule.

Performing regular oil changes is crucial to keep your Hyundai Kona running smoothly and efficiently. By following this step-by-step procedure, you can ensure that your oil change process is done correctly and maintain the health of your vehicle.