John Deere X700 Series Mower Lawn Tractors ROPS Cab Operator

John Deere X700 Mower (Lawn Tractors) Series Cab

• John Deere x700 lawn tractor
• John Deere x710 mower,
• John Deere x730 lawn tractor,
• John Deere x734 lawn tractor,
• John Deere x738 lawn tractor,
• John Deere x739 lawn tractor,
• John Deere x750 lawn tractor,
• John Deere x754 mower,
• John Deere x758 mower

John Deere x754 mower

John Deere x739 lawn tractor

Maintenance Safety:

1. Remove mud, crop residue, chains, and tools from steps and operator’s platform. They may interfere with pedal operation or entry/exit from tractor.
2. When servicing components are too high to reach from the ground use steps and handholds. Do not use fenders or shields that are not designed as steps.

ROPS Safety:

1. Install the ROPS in accordance with Tektite mounting instructions. Failure to do so may affect the ROPS ability to withstand a roll over.
2. If the ROPS is subjected to alteration, structural damage or involved in an over turn accident, the entire structure must be replaced. Failure to do so may result in injury or death in the event of a roll over.
3. If the tractor in not equipped with seat belts, purchase approved seat belts from the tractor manufacturer or Tektite prior to operating the tractor.
4. Always fasten seat belts prior to operating the tractor.
5. Always operate the tractor from the operator’s seat.
6. Remove mud, crop residue, chains and tools from steps and operator’s platform. They may interfere with pedal operation or entry/exit from the tractor.
7. Remove all loose chains, tools, and equipment from the operator’s platform. Failure to do so may cause injury or death in the event of a roll over.
8. Do not install the ROPS on a tractor model that the ROPS is not designated for (compatible tractor designations are printed on the ROPS serial number plate). The ROPS is designed specifically for individual models to ensure ROPS requirements will be met. Installing the ROPS on a non designated tractor may result in injury or death.

Cab Switch Plate

• Front Wiper Rocker Switch (standard):

Low position: Off,

High position: On

Note: indicator light activates when wiper is on.

• Rear Wiper Rocker Switch (not available on all models):

Low position: Off

High position: On

Note: indicator light activates when wiper is on.

• Front Work Light Rocker Switch (optional):

Low position: Off

High position: On

Note: indicator light activates when work lights are on

• Rear Work Light Rocker Switch (optional):

Low position: Off

High position: On

Note: indicator light activates when work light is on.

• Beacon Rocker Switch (optional):

Low position: Off

High position: On

Note: indicator light activates when work lights are on.

• Water Heater Fan Rocker Switch (optional):

Low position: Off

High position: On

Note: indicator light activates when work lights are on.

Standard and optional features are individually fused, and the fuses can be accessed behind the plug in the middle of the switchplate.

Safe Highway Operation

• Before operating the tractor on, or near, public roadways check with your local authorities for any local regulations that will affect you.
• Equip towed implements with slow moving vehicle (SMV) signs when traveling on public roads.
• Install additional lights on implement rear to safeguard against rear end collisions.
• Use hazard warning flashers as required by law when transporting or driving on public roads. If the tractor had warning flashers removed when mounting the ROPS, they must be replaced prior to operation on public roads.
• Keep to the right, yielding right-of-way traffic, especially if pulling implements. Pull off the road and stop to allow motorists to pass. Drive on the road shoulder, if permitted by law.
• Use extreme caution when pulling heavy loads at road speeds. Avoid hard application of the tractor brakes at high speed.
• Always drive slowly near curbs, approaches or ditches.
• If equipped, ensure headlights are aligned so they will not blind the operator’s of oncoming vehicles. If the tractor is not equipped with turn signals and law requires them, install them prior to operating on or near public roads.

Rate this:

Raiting: 5 / Total: 1