LG Washer Won't Drain UE Error

Having trouble with your LG washer not draining and displaying the UE error code? Don't worry, you're not alone. This common issue can often be resolved with a few troubleshooting steps. In this article, we will guide you through the possible causes and solutions for an LG washer displaying the UE error code.

Possible Causes of UE Error:

• Unbalanced Load: When the washer detects an unbalanced load, it may not be able to drain properly. This can occur when the laundry is clumped together or if items are not evenly distributed inside the drum.
• Clogged Drain Hose: A clogged drain hose can prevent the water from draining out of the washer. It is essential to check the drain hose for any blockages or kinks.
• Drain Pump Issues: A faulty drain pump can also cause the UE error code to appear. If the pump is not functioning properly, the water won't drain from the machine.
• Improper Installation: If the washer is not installed correctly, it can lead to drainage problems. Ensure that the drain hose is positioned at the correct height and is not placed too far into the drain pipe.

Solutions:

Here are some steps you can take to troubleshoot and fix the UE error code:

1. Pause Cycle: If the washer stops due to an unbalanced load, pause the cycle and redistribute the laundry evenly inside the drum. Once balanced, resume the cycle and see if the issue is resolved.
2. Check Drain Hose: Inspect the drain hose for any clogs or kinks. Clear any obstructions and ensure that the hose is not bent or twisted.
3. Verify Drain Pump: Listen for any unusual noises coming from the drain pump. If it is faulty, it may need to be repaired or replaced by a professional technician.
4. Reposition Drain Hose: Ensure that the drain hose is not placed too far into the drain pipe. It should be at the correct height as specified in the user manual.
5. Reset Washer: Sometimes, a simple reset can resolve the error. Turn off the washer, unplug it from the power source, wait for a few minutes, and then plug it back in. Restart the washer and see if the error is cleared.

If the above solutions do not resolve the issue, it is recommended to contact LG customer support or schedule a service appointment with a qualified technician. They will be able to diagnose the problem accurately and provide the necessary repairs.

In conclusion, an LG washer displaying the UE error code often indicates an unbalanced load, clogged drain hose, or drain pump issues. By following the troubleshooting steps outlined in this article, you can resolve the problem and get your washer running smoothly again.