Ski Doo 600 ACE Antifreeze Removal

When it comes to maintaining your Ski Doo 600 ACE snowmobile, one important task is removing the antifreeze. Flushing the cooling system regularly ensures optimal performance and prevents any potential damage caused by old or contaminated coolant. Here is a guide on how to properly remove the antifreeze from your Ski Doo 600 ACE.

Step 1: Gather the Necessary Materials

Before you begin, ensure you have all the required materials for the antifreeze removal process:

• Container or drain pan
• Wrench or pliers
• New antifreeze
• Distilled water
• Clean cloth or rag

Step 2: Preparation

First, make sure your snowmobile is fully cooled down before starting the process. Remove the seat to gain access to the coolant reservoir. It is recommended to wear gloves and safety goggles to protect yourself from any spills or splashes.

Step 3: Draining the Antifreeze

Place the drain pan or container beneath the coolant drain plug, which is usually located at the bottom of the snowmobile. Use a wrench or pliers to loosen the drain plug and let the old antifreeze flow into the container. Be cautious not to touch the hot engine parts during this step.

Step 4: Flushing the System

Once all the old antifreeze has been drained, it is important to flush the cooling system with distilled water. Fill the reservoir with distilled water and let the engine idle for a few minutes. Then, carefully drain the water following the same steps as in Step 3.

Step 5: Refilling with New Antifreeze

After flushing the system, it is time to refill it with new antifreeze. Read the manufacturer’s instructions to ensure you are using the correct type and mix the antifreeze accordingly. Pour the new mixture into the coolant reservoir, making sure not to overfill.

Step 6: Check for Leaks and Proper Levels

Inspect the coolant drain plug for any signs of leaks and tighten if necessary. Run the snowmobile for a few minutes and monitor the coolant levels. Adjust if needed to maintain the proper fluid level.

Step 7: Clean-Up

Once the antifreeze removal process is complete, clean any spills or stains with a clean cloth or rag. Dispose of the old antifreeze properly, following local regulations for hazardous waste disposal.

By regularly removing old antifreeze and replacing it with new coolant, you are ensuring the longevity and optimal performance of your Ski Doo 600 ACE snowmobile. Remember to consult your owner's manual or contact a professional if you encounter any difficulties or have specific questions about this process.