Skoda Kamiq Oil Change DIY

Regular oil changes are essential for maintaining the performance and longevity of your Skoda Kamiq. While it is usually recommended to have the oil change done by a professional, some car enthusiasts prefer to perform the procedure themselves. If you are one of them, this DIY guide will walk you through the steps of changing the oil in your Skoda Kamiq.

What You Will Need:

• New engine oil (check your vehicle's manual for the recommended type and quantity)
• Oil filter
• Oil filter wrench
• Socket wrench
• Oil drain pan
• Jack and jack stands (for lifting and securing the vehicle)
• Funnel
• Rags or paper towels

Step-by-Step Guide:

1. Prepare Your Vehicle

Park your Skoda Kamiq on a level surface and engage the parking brake. Make sure the engine has cooled down to avoid any accidental burns.

2. Locate the Oil Drain Plug

Consult your vehicle's manual to locate the oil drain plug. It is typically situated underneath the engine. Place the oil drain pan directly beneath the plug to catch the old oil.

3. Drain the Old Oil

Using a socket wrench, carefully loosen the drain plug in a counterclockwise direction. Allow the old oil to fully drain into the pan. Once it has stopped dripping, tighten the plug back in a clockwise direction.

4. Replace the Oil Filter

Locate the oil filter, which is typically situated near the oil drain plug. Use an oil filter wrench to remove the old filter in a counterclockwise direction. Apply a thin layer of fresh oil to the gasket of the new oil filter, then screw it in place by hand. Tighten it with the oil filter wrench to ensure a proper seal.

5. Add Fresh Oil

Locate the oil filler cap on top of the engine. Remove it and insert a funnel. Slowly pour the recommended amount of fresh oil into the engine, as specified in your vehicle's manual. Take care not to overfill, as it may lead to engine damage.

6. Check the Dipstick

After adding the oil, wait for a few moments to allow it to settle in the engine. Remove the dipstick, wipe it clean with a rag or paper towel, then reinsert it fully. Pull it out again and check the oil level. It should be within the designated range on the dipstick. Add more oil if necessary.

7. Dispose of the Old Oil Properly

Take the used oil and properly dispose of it at a local recycling center or an authorized collection point. Do not pour it down the drain or throw it in the trash.

8. Clean Up and Recap

Clean any spilled oil or residue from the engine and surrounding areas using rags or paper towels. Recap the oil filler cap tightly.

9. Record the Maintenance

Keep a record of the date, mileage, and type of oil used for future reference. This will help you stay on top of your vehicle's maintenance schedule.

Performing an oil change on your Skoda Kamiq by yourself can be a rewarding experience if done correctly. However, if you are not comfortable with the procedure or do not have the necessary tools, it is always recommended to seek professional assistance. Regular oil changes will ensure the smooth operation and longevity of your Skoda Kamiq.