Toyota Yaris Oil Change Procedure

Performing regular oil changes on your Toyota Yaris is crucial for maintaining the health and longevity of your engine. Fresh oil helps to lubricate the moving parts, reduce friction, and prevent engine damage. In this guide, we will take you through a step-by-step procedure on how to change the oil in your Toyota Yaris.

Tools and Materials Needed:

• Car jack or ramps
• Oil filter wrench
• Oil drain pan
• New oil filter
• New engine oil (check your owner's manual for the recommended oil type and quantity)
• Rubber gloves
• Funnel
• Shop rag

Step 1: Preparation

Park your Toyota Yaris on a flat surface and turn off the engine. Engage the parking brake for added safety. Gather all the required tools and materials mentioned above.

Step 2: Raise the Vehicle

Use a car jack or ramps to raise the front of your Yaris. Ensure that the vehicle is secure and stable before proceeding.

Step 3: Locate the Oil Drain Plug

Underneath the engine, you will find the oil drain plug. Refer to your owner's manual if you're having trouble locating it.

Step 4: Position the Oil Drain Pan

Place the oil drain pan directly below the oil drain plug, ensuring it can catch the draining oil effectively.

Step 5: Remove the Oil Drain Plug

Using a wrench that fits the drain plug, carefully turn it counterclockwise to loosen and remove it. Allow the old oil to drain completely into the pan.

Step 6: Change the Oil Filter

Locate the oil filter, which is usually on the side of the engine. Use an oil filter wrench to remove the old filter. Empty any remaining oil from the filter into the drain pan. Apply a small amount of fresh oil to the rubber gasket of the new oil filter, then screw it onto the engine by hand. Tighten it securely, but avoid over-tightening.

Step 7: Add New Oil

After allowing all the old oil to drain out, replace the oil drain plug and tighten it securely. Take off the oil filler cap, usually located on top of the engine, and use a funnel to pour in the recommended amount of new oil. Refer to your owner's manual for the specific oil type and quantity.

Step 8: Check Oil Level

Once the new oil is added, replace the oil filler cap and start your engine. Let it run for a few minutes, then turn it off. After a few minutes, check the oil level using the dipstick. It should be within the recommended range on the dipstick. If necessary, add more oil accordingly.

Step 9: Clean Up

Wipe off any spilled oil, reinstall any access panels, and properly dispose of the used oil and filter in accordance with local regulations. Store the oil in a suitable container for disposal or recycling.

Congratulations! You have successfully changed the oil in your Toyota Yaris. Regular oil changes will help keep your engine running smoothly and prolongs its life. Always consult your owner's manual for specific instructions and maintenance intervals.