Using Lorex DVR on Dish Network Internet

Are you looking to integrate your Lorex DVR with your Dish Network Internet service? Look no further, as we provide you with a comprehensive guide to get the most out of your Lorex DVR on the Dish Network Internet platform.

Connecting your Lorex DVR to Dish Network Internet

The first step in using your Lorex DVR on Dish Network Internet is to establish a stable connection. Follow these steps:

1. Ensure your Dish Network Internet service is active and functional.
2. Connect your Lorex DVR to your home network. Use an Ethernet cable to connect the DVR to your Dish Network router.
3. Power on your Lorex DVR and wait for it to boot up completely.
4. Access the menu settings on your Lorex DVR and navigate to the network settings section.
5. Select the "Auto (DHCP)" or "Auto (Dynamic IP)" option to automatically obtain an IP address. Alternatively, choose the "Manual" option if you prefer to assign a specific IP address.
6. Save your changes and exit the network settings menu.

Configuring Port Forwarding

In order to access your Lorex DVR remotely, you will need to configure port forwarding on your Dish Network router. Follow these steps:

1. Access your Dish Network router's web-based configuration page. Typically, this can be done by typing "192.168.1.1" or "192.168.0.1" in your web browser's address bar.
2. Enter your router's login credentials. If you haven't modified the default login details, they can often be found on the back of your router or in the user manual.
3. Look for the "Port Forwarding" or "Virtual Servers" section in the router's settings.
4. Create a new port forwarding rule by specifying the following details:
   • Protocol: TCP/UDP
   • External Port: Choose a port number (e.g., 8080)
   • Internal Port: Enter the port number used by your Lorex DVR (usually 80 by default)
   • Internal IP Address: Enter the IP address assigned to your Lorex DVR
5. Save the port forwarding rule and exit the configuration page.

Accessing your Lorex DVR Remotely

Now that your Lorex DVR is connected to Dish Network Internet and port forwarding is configured, you can access it remotely. Follow these steps:

1. Open a web browser on your computer or mobile device.
2. Enter your external IP address followed by the port number you set during port forwarding (e.g., http://123.456.789.123:8080).
3. You will be prompted to enter your Lorex DVR's login credentials. Provide the correct username and password.
4. You should now have access to your Lorex DVR's live video feed and playback of recorded footage.

Note: It is important to secure your remote access by configuring strong passwords for your Lorex DVR and Dish Network router, as well as keeping your firmware up to date.

By following these steps, you can effectively use your Lorex DVR on the Dish Network Internet platform. Enjoy the convenience of accessing your surveillance system remotely and staying connected at all times!