Volvo S90 Oil Change Procedure

Regular oil changes are essential to keep your Volvo S90 engine running smoothly and to ensure its longevity. Changing the oil is a relatively simple task that you can do yourself or have it done by a professional. Here is a step-by-step guide to help you through the process:

Step 1: Gather the necessary tools and materials

Before you begin, make sure you have the following items:

• Oil filter
• Replacement oil (check your vehicle's manual for the recommended type and amount)
• Drain pan or bucket
• Socket wrench or oil filter wrench
• Funnel
• Rag or paper towels

Step 2: Prepare the vehicle

Park your Volvo S90 on a level surface and engage the parking brake. Allow the engine to cool down for a few minutes before proceeding.

Step 3: Find and remove the old oil filter

The oil filter is typically located under the hood of your vehicle. Consult your owner's manual or search online for the exact location in the S90 model. Once you locate it, use a socket or oil filter wrench to loosen and remove the old filter. Be careful to catch any drips with the drain pan.

Step 4: Drain the old oil

Locate the oil drain plug underneath your vehicle. Again, refer to the owner's manual for the specific location. Place the drain pan beneath the plug, then use a socket wrench to loosen and remove the plug. Allow the old oil to drain completely into the pan.

Step 5: Replace the oil filter

Dip your finger in the new oil and spread a thin layer on the rubber gasket of the new oil filter. This will help create a better seal. Screw the new filter into place, using your hand initially, and then tighten it with a wrench until it's snug. Avoid overtightening as it can damage the filter or cause leaks.

Step 6: Add new oil

Locate the oil cap under the hood and remove it. Insert a funnel into the opening and pour in the new oil according to the recommended amount specified in your vehicle's manual. Once finished, replace the oil cap tightly.

Step 7: Check the oil level

Start your engine and let it run for a few minutes. Turn it off and wait for a couple of minutes to allow the oil to settle. Then, use the dipstick to check the oil level. Add more oil if necessary, but be careful not to overfill.

Step 8: Clean up and dispose of the old oil

Wipe off any oil spills or drips with a rag or paper towels. Transfer the old oil from the drain pan to a sealable container and ensure proper disposal. Many auto parts stores or service centers accept used oil for recycling.

By following this step-by-step procedure, you can easily perform an oil change on your Volvo S90. However, if you are not confident or comfortable doing it yourself, it is always wise to take your vehicle to a certified mechanic for an oil change to ensure it is done correctly and efficiently.

Remember to consult your Volvo S90 owner's manual for any specific instructions or recommendations as maintenance procedures may vary slightly between models and years.