Whirlpool Stove Troubleshooting Codes

Whirlpool stoves are known for their reliability and functionality. However, like any other appliance, they might encounter issues from time to time. One of the most helpful features of modern Whirlpool stoves is their built-in error code system. These error codes can assist in diagnosing and troubleshooting common problems that may occur while using the stove. In this article, we will explore some of the most common Whirlpool stove troubleshooting codes and what they mean.

1. F1 or E1 Error Code:

This code indicates a problem with the stove's electronic control board. It usually occurs when the board becomes faulty or malfunctions. To resolve this issue, you should consider replacing the control board after disconnecting the power supply to the stove.

2. F2 or E2 Error Code:

The F2 or E2 error code typically indicates an issue with the oven's temperature sensor. It implies that the sensor has surpassed the recommended resistance levels. You should first check the sensor's wiring connections and ensure they are secure. If the problem persists, replacing the sensor might be necessary.

3. F3 or E3 Error Code:

An F3 or E3 error code is related to the stove's oven temperature sensor circuit. It usually arises when the oven temperature sensor or the wiring is faulty. Inspect the connections and wiring to ensure they are intact. If needed, replace the sensor to resolve the issue.

4. F4 or E4 Error Code:

The F4 or E4 error code indicates an issue with the oven's oven temperature sensor circuit. It suggests that the sensor or the wiring might be malfunctioning. Carefully check the wiring and connection for any damages. If required, replace the sensor to solve the problem.

5. F5 or E5 Error Code:

An F5 or E5 error code signifies a potential issue with the stove's door latch. It suggests that the latch might be defective or misaligned. Ensure that the door is properly closed and latched. If the error persists, you may need to replace the door latch mechanism.

6. F6 or E6 Error Code:

This code indicates a problem with the stove's door switch. It means that the switch might be faulty. Inspect the switch and its wiring to identify any defects. If necessary, replace the switch to resolve the error.

7. F7 or E7 Error Code:

The F7 or E7 error code is related to a malfunction in the bake or broil relay on the stove's electronic control board. It usually occurs due to a faulty relay or control board. In such cases, it is recommended to replace the affected part, be it the relay or the entire control board.

Remember, these troubleshooting codes are meant to help in diagnosing the problem. While some issues might be resolved by following the suggested troubleshooting steps, complex problems may require professional assistance. Always prioritize safety and disconnect the power supply before attempting any repairs on your Whirlpool stove.