Installing the Fitness Tracker
1. Insert one end of the fitness tracker into the slot from the front of the wristband.
2. Press down on the other end with your thumb to push the fitness tracker into the slot completely
Wearing the Xiaomi Band
Tighten the wristband around your wrist until there is enough slack to fit about one finger, then adjust the fit until you find a comfortable position. Note: Wearing the band too loosely may impact data collection by the heart rate monitor.
Pairing the Xiaomi Band with a Smartphone
1. To download the Mi Fit app, scan the QR code below or search for "Mi Fit" on the Mi App Store or Apple Store.
2. Open the Mi Fit app, log in to your account and select "Device Pairing", then follow the pairing instructions to proceed. When the Xiaomi Band starts to vibrate and the Bluetooth pairing notification appears on the screen, press the button to complete the pairing process. Note: Please make sure Bluetooth connection is activated on your mobile phone. During the pairing process, please keep the Xiaomi Band near your mobile phone.
Using the Fitness Tracker
After the Xiaomi Band is paired successfully, it will begin to track and analyze your daily activities and sleeping habits. Touch to light up the screen.
Slide up or down on the screen to browse your activity data, measure your heart rate, and access many other features.
Slide left or right on the screen to switch the display between different items.
Removing the Fitness Tracker
Remove the wristband from your wrist, hold on to each end and pull on the wristband until you see a small gap between the fitness tracker and the wristband. Use your finger to pop the fitness tracker out of its slot from the front side of the wristband.
Charging the Xiaomi Band
Please charge your Xiaomi Band immediately when the low power indicator is on.
Important Safeguards
When using the Xiaomi Band to measure your heart rate, please keep your wrist steady.
Xiaomi Band 3 has a water resistance rating of 5ATM. It can be worn in the shower, swimming pool, or while swimming near the shore. It cannot be used, however, while sitting in a sauna or diving in the ocean.
Underwater operation is not supported for the Xiaomi Band's touch-button and touchscreen. After the Xiaomi Band has come in contact with water, please use a soft cloth to wipe away excess water from its surface before using the device.
During daily use, please do not wear the Band too tightly around your wrist and keep its contact area dry. You should also clean the wristband regularly with water. Please stop using the product immediately and seek medical assistance if the contact area on your skin begins to show signs of redness or swelling.
Name: Xiaomi Band 3
Model: XMSH05HM
Weight of the Fitness Tracker: 8.5 g
Dimensions of the Fitness Tracker: 17.9 x 46.9 x 12 mm
Wristband material: Thermoplastic elastomer
Clasp material: Aluminum alloy
Adjustable length: 155 - 216 mm
Compatible with: Android 4.4/iOS 9.0 or later
Baery capacity: 110mAh
Battery type: Li-Ion polymer battery
Input voltage: DC 5 V
Input current: 250 mA (Max)
Frequency: 2402-2480MHz
Max output: 0dBm
IP rating: 5ATM
Operating temperature: -10°C ~ 50°C
Wireless connectivity: Bluetooth 4.2 BLE
Ask me about:
How to reset the Xiaomi Mi band 3?
Turn on Mi fit App.
Click on the profile tab.
Go to MI band 3.
Sweep the screen several times from bottom to top.
Click Unpair button and confirm.
1. RESTART PHONE AND MI BAND
2. PAIR PROPERLY
3. UNPAIR MI BAND FROM BLUETOOTH
4. UNPAIR MI BAND FROM APP
5. CHARGE THE BAND
6. CLEAR CACHE AND DATA OF MI FIT APP
7. UPDATE MI FIT APP
8. RE-INSTALL APP
9. PAIR WITH A DIFFERENT PHONE
10. PAIR USING THIRD-PARTY APP
11. FACTORY RESET MI BAND
The Mi Band 3 is receiving much needed addition which will now let users answer calls on the connected device without touching the smartphone. Apart from calls, you can get app and call notifications on the Mi Band 3 fitness band. It also comes with motion tracking and health management, much like previous models.
Use the 20-digit security code to check any Xiaomi product. This way is suitable for any Xiaomi product, like Mi tablet, Bluetooth earphone, electric shaver, electric toothbrush and so on. The security code is located at the back of Xiaomi product's package box.
Now let's check the solutions to fix Mi Band not charging the first time or charge dead Mi Band.
Connect Properly. The main reason behind Mi Bands not charging is because of its incorrect position in the charging cable.
Keep It Connected for Some Time.
Clean Charging Pins.
Change Charging Method.
Hit Mi Band.
Steps to Reset Mi Band 2 with Android
Force stop the “'Bluetooth Share process” by going into Settings>Apps>Under Running Apps.
Remove any Data that is cached in the process.
Go to your BlueTooth settings and select the Mi band and tap “Forget Device.”
Re-open Mi Fit App and pair the device from the beginning.
Some points to check:
Quality of the box.
The tracker has logo at its back.
Strap Quality.
Charger has Flat strap and a logo is present.
The Original one will get integrated with the Mi Fit app whereas the Fake one will not.
Askme / 8/11/2020 3:34:44 AM (Original: 1280X720 px)
Askme / 8/11/2020 3:35:12 AM (Original: 840X560 px)
Why is the Samsung SCR-4101N DVR security camera system displaying a password no match error when the admin password is inputted? How to hard reset Samsung DVR?
Samsung / DVR Answers: 1Can a Lorex DVR with 4K cameras be used for live viewing on Dish Network internet, despite issues connecting to the DVR through the Lorex Home app?
Lorex / DVR Answers: 1LG TV 70 inch TV is turned on 10 seconds after the picture is gone, but there is sound.
LG / TV Answers: 1What can I do if the Cambridge Audio Azur 640A V2.0 is not responding to the remote control?
Cambridge / Audio Azur Answers: 1How to fix Canon Imagerunner advance 2030 error code E000196-1BFF?
Canon / Imagerunner 2030 Answers: 1How to Creating Music in Logic Pro? How to Creating and Importing Your Musical Material? How to Understanding the Basics of Projects and Regions?
Logic Pro / Creating Music Answers: 1How to Send, receive, and request money with Apple Watch? How to Send a payment from Apple Watch? How to Cancel a payment?
Apple Watch / Send, receive, and request money Answers: 1How to Set up Apple Pay on Apple Watch? How to Remove a card from Apple Pay? How to Change your default transaction details?
Apple Watch / Set up Apple Pay Answers: 2How to Use Walkie-Talkie on Apple Watch? How to Invite a friend to use Walkie-Talkie? How to Make yourself unavailable? How to Talk with a single tap?
Apple Watch / Using Walkie-Talkie Answers: 1How to Set timers on Apple Watch? Quickly set a timer, pause or end? How to Create a custom timer? How to Create multiple timers?
Apple Watch / Set timers Answers: 1How to Use your Apple Watch to control Apple TV? How to Pair your Apple Watch with Apple TV? How to Control Apple TV with Apple Watch? Unpair and remove Apple TV
Apple Watch / Control Apple TV Answers: 1How to Use Apple Watch to control music on a Mac or PC? How to Add a music library? How to Control playback from Apple Watch? How to Choose a media library to play from? How to Remove a media library?
Apple Watch / Control music on Mac or PC Answers: 2How to Set and respond to reminders on Apple Watch? How to See your reminders? How to Respond to a reminder notification? How to Create a reminder? How to Delete a reminder, choose a default list, reorder lists?
Apple Watch / Reminders Answers: 1How to Download specific podcasts to Apple Watch? How to Add podcasts to Apple Watch? How to Play podcasts on Apple Watch?
Apple Watch / Podcasts Answers: 1How to Take a screenshot of Apple Watch? How to Stop photo syncing? How to Limit photo storage on Apple Watch? How to Choose the album to store on Apple Watch?
Apple Watch / Photos & Screenshot Answers: 3