How to fix LG washer with drum not turning?

How to Fix LG Washer with Drum Not Turning | Ultimate Troubleshooting Guide

How to Fix LG Washer with Drum Not Turning

Is your LG washer drum not turning? This can be a frustrating issue that can impede your laundry routine. However, with a little troubleshooting, you can often resolve the problem yourself without the need for professional assistance. In this article, we'll guide you through the steps to identify and fix the issue causing your LG washer's drum not to turn effectively.

1. Check for Power Supply

First and foremost, confirm that your LG washer is receiving power. Check if it is plugged in properly and that the circuit breaker has not tripped. If the washer has power but the drum is not turning, proceed to the next step.

2. Examine the Drive Belt

The next step is to inspect the drive belt, which is responsible for turning the drum. Over time, the belt can become worn or loose, causing it to slip or break. Locate the belt at the bottom of the washing machine and check for any visible signs of damage. Replace a damaged or worn-out drive belt with a new one following the manufacturer's instructions.

3. Verify the Motor and Motor Control Board

If the drive belt appears to be in good condition, the issue may lie with the motor or the motor control board. Carefully remove the back panel of your LG washer to gain access to these components. Inspect the motor for any signs of damage or burning smell. Additionally, examine the motor control board for any visible defects, such as burnt-out parts or loose connections. If any issues are found, consider hiring a professional technician or contacting LG support for assistance.

If both the drive belt and motor seem to be working fine, move on to the next step.

4. Check the Drum Roller and Bearings

Worn-out drum rollers or faulty bearings can also cause the drum to stop turning properly. Inspect the drum rollers and bearings for signs of damage, excessive wear, or rust. If any issues are detected, these components will likely require replacement.

5. Inspect the Drum Pulley

Another component to examine is the drum pulley. Ensure that it rotates freely and that the belt is properly attached to it. If the pulley is damaged or if the belt is misaligned, it may need to be replaced to restore the drum's function.

6. Test the Lid Switch

If your LG washer has a lid switch, it ensures that the drum only spins when the lid is closed. Check if the lid switch is functioning properly by using a multimeter to test for continuity. If the lid switch is defective, it should be replaced to solve the issue.

7. Call for Professional Assistance

If you've followed all the previous steps and the drum is still not turning, it is recommended to seek professional assistance. A trained technician will have the expertise and tools to identify and fix complex motor or electrical problems that may be causing the issue.

By following these troubleshooting steps, you can often identify and fix the problem of an LG washer with a drum not turning on your own. However, if you're unsure or uncomfortable performing any of the steps, it's always best to consult a professional to avoid any further damage to your appliance.

Remember to always refer to your LG washer's user manual for specific instructions and safety guidelines. Regular maintenance and proper handling of your washer can help prevent such issues from occurring in the first place.

Disclaimer: This article is meant to provide general guidance for troubleshooting an LG washer with a drum not turning. These suggestions and steps may not apply to all LG washer models. It is recommended to refer to the manufacturer's manual or contact LG support for model-specific instructions.