What are the common malfunction codes on an Asko washer and how can they be resolved?

Common Malfunction Codes on an Asko Washer and How to Resolve Them

Asko washers are known for their reliability and efficiency. However, like any other appliance, they can sometimes encounter issues that can be identified by specific malfunction codes. Here are some common malfunction codes on an Asko washer and the steps you can take to resolve them:

1. F1 or F2 Error Code:

This code indicates a problem with the water inlet system. To resolve this, first, check if the water faucets connected to the washer are fully open. Also, ensure that the water inlet hoses are not bent or kinked. If the problem persists, turn off the water supply, disconnect the hoses, and clean the filters on the inlet valves. Reconnect the hoses and turn the water supply back on.

2. F3 Error Code:

The F3 code signifies a drain pump or drain pipe obstruction issue. Start by checking the drain pump filter for any clogs or debris. Clean it thoroughly if necessary. Also, inspect the drain hose for any obstructions or kinks that might be preventing proper drainage. Straighten or clear the hose as needed.

3. F4 Error Code:

An F4 code indicates an issue with the door lock mechanism. Ensure that the door is fully closed and latched. If the problem persists, check if the door latch and strike are aligned properly. Adjust or replace them if necessary. Additionally, check for any loose or damaged wiring connections related to the door lock assembly.

4. F5 Error Code:

The F5 code points to a problem with the water temperature sensor. You can try resolving this by checking if the hot and cold water supply valves are fully open. Inspect the inlet hoses for any restrictions or blockages that might affect water flow. If the issue persists, it might be necessary to replace the water temperature sensor.

5. F7 Error Code:

An F7 code indicates an issue with the motor control board. First, try resetting the washer by unplugging it from the power source for a few minutes and then plugging it back in. If the error continues to occur, the motor control board might need to be professionally repaired or replaced.

Remember, if you encounter any malfunction codes on your Asko washer that are not mentioned here, it's always best to consult the user manual or contact a professional service technician for further assistance.