Steps for Ford Explorer oil change?

Question

Steps for Ford Explorer oil change?

Learn how to perform an oil change for your Ford Explorer with our easy step-by-step guide. Ensure optimal engine health and longevity.

Subject: Ford - Sub Subject: Ford Explorer oil change steps
Date: 12/22/2023 Status: SOLVED
3 answered / 1 voted, viewed icon

56 viewed.

score 54 · Accepted Answer

Steps for Ford Explorer Oil Change

Regular oil changes are an essential part of maintaining your Ford Explorer's engine and ensuring its longevity. By following the proper steps, you can complete an oil change on your Ford Explorer in no time. Here is a comprehensive guide on how to change the oil in your Ford Explorer.

Step 1: Gather the Necessary Tools and Equipment

Before starting the oil change process, gather all the required tools and equipment. This includes:

A new oil filter
A wrench or socket set
An oil filter wrench or pliers
A drain pan
Oil filter seal or gasket
A funnel
A rag or paper towels
The appropriate amount and type of motor oil (refer to your owner's manual)

Step 2: Prepare Your Vehicle

Park your Ford Explorer on a level surface and engage the parking brake. Allow the engine to cool down so you don't burn yourself while working with hot oil.

Step 3: Drain the Old Oil

Locate the oil drain plug underneath the engine. Position the drain pan beneath it to catch the old oil. Loosen the plug using a wrench or socket set, and then remove it by hand. Allow the old oil to completely drain into the pan.

Step 4: Replace the Oil Filter

Using an oil filter wrench or pliers, remove the old oil filter. Make sure to properly dispose of the old filter. Before installing the new oil filter, apply a thin film of oil onto the rubber gasket to ensure proper sealing. Hand-tighten the new filter in place.

Step 5: Add New Oil

Position a funnel in the oil filler hole located on top of the engine. Pour in the appropriate amount and type of motor oil as per your Ford Explorer's specifications. Refer to your owner's manual for the recommended oil capacity and viscosity. After adding the oil, securely replace the oil filler cap.

Step 6: Check the Oil Level

Start your vehicle and let it idle for a few minutes. Turn off the engine and wait for a minute or two to allow the oil to settle in the oil pan. Remove the dipstick, wipe it clean, and reinsert it. Pull it out again and check the oil level. It should be between the minimum and maximum marks on the dipstick. If necessary, add more oil and recheck the level.

Step 7: Dispose of the Old Oil Properly

It is crucial to dispose of the old oil in an environmentally-friendly manner. Seal the used oil in the drain pan and take it to a local waste disposal facility or an automotive repair shop that accepts used oil for recycling.

Congratulations! You have successfully completed the oil change process for your Ford Explorer. Regularly following these steps will help keep your engine in excellent condition and prolong its lifespan.

Steps for Ford Explorer oil change?