How to replace LG washer motor sensor?

How to Replace LG Washer Motor Sensor - Step-by-Step Guide

How to Replace LG Washer Motor Sensor - Step-by-Step Guide

Is your LG washer experiencing motor sensor issues? Not to worry, with a little guidance and some basic tools, you can easily replace the motor sensor yourself. Here is a detailed step-by-step guide to help you through the process.

Step 1: Safety Precautions

Before starting any repair, it is essential to ensure your safety. Here are a few precautions to follow:

• Unplug the washer from the power source to avoid electrical shock.
• Wear protective gloves to protect your hands from sharp edges or any potential harm.
• Place a towel or mat on the floor to avoid damage to the surface and provide a comfortable working area.

Step 2: Accessing the Motor Sensor

The motor sensor is usually located on the back or bottom of the washing machine, depending on the specific LG model. To access it:

1. Move the washer away from the wall to allow space for you to work comfortably.
2. Use a screwdriver to remove the screws securing the back or bottom panel of the washer.
3. Set the panel aside, exposing the motor and other components.

Step 3: Removing the Faulty Motor Sensor

Now that you have accessed the motor sensor, it's time to remove the old, malfunctioning sensor:

1. Locate the motor sensor on the motor assembly.
2. Disconnect any wires attached to the sensor. Take note of the wire placement or take a picture for reference during reassembly.
3. Loosen the screws or clips holding the motor sensor in place using a suitable tool.
4. Carefully remove the sensor from its position.

Step 4: Installing the New Motor Sensor

With the old sensor removed, let's proceed with installing the new motor sensor:

1. Take the replacement sensor and align it with the motor assembly.
2. Ensure the sensor is positioned correctly and securely fits into place.
3. Tighten the screws or clips to secure the new sensor. Be cautious not to overtighten, as it may damage the sensor or motor assembly.
4. Reconnect the wires to the appropriate terminals, referring to the photo or notes taken during disassembly.

Step 5: Reassembling the Washer

Now that the new motor sensor is installed, it's time to put everything back together:

1. Replace the back or bottom panel of the washer and secure it with the screws.
2. Ensure all screws are tightened but not excessively.

Step 6: Testing

After completing the replacement, it's crucial to test the washer to verify if the motor sensor issue has been resolved:

1. Plug the washer back into the power source.
2. Select a test cycle or run a regular load as recommended by LG.
3. Observe the washer's performance to confirm if the motor sensor problem has been successfully resolved.

Congratulations! You have successfully replaced the motor sensor in your LG washer. By following these steps carefully, you can save both time and money by avoiding a professional repair service.

If you are still experiencing issues with your washer or encountered any problems during this process, it is recommended to consult a professional technician or contact LG's customer support for further assistance.