Clearing E000196 1bff Error On Canon Imagerunner 2030

Clearing e000196 1bff error on Canon ImageRunner 2030

If you are encountering an e000196 1bff error on your Canon ImageRunner 2030 printer, don't worry, there are steps you can take to clear this error and get your printer back to functioning normally. This error generally indicates a problem with the fixing unit temperature or thermistor.

To tackle this issue, follow the steps below:

1. Power off your Canon ImageRunner 2030 printer and unplug it from the power source. Give it a few minutes to cool down.
2. After the printer has cooled down, plug it back in and power it on.
3. If the error persists, you may need to check the connections between the fixing film unit and the power supply PCB. Ensure all connections are secure and properly attached.
4. If the connections are fine, you may need to replace the thermistor. Locate the fixing film unit and carefully remove it. Consult the printer's manual or contact Canon support for instructions on replacing the thermistor.
5. Once the thermistor has been replaced, reassemble the fixing film unit and reinstall it in the printer.
6. Finally, power on the printer and check if the e000196 1bff error is cleared. The printer should resume normal operation.

If the above steps do not resolve the error, it is recommended to contact a qualified technician or Canon support for further assistance. They may be able to provide specific guidance or perform advanced troubleshooting procedures to address the issue.

Remember, it is crucial to follow proper safety precautions while handling the printer components. Always refer to the user manual or seek professional help if you are unsure about any step.

By following these steps, you should be able to clear the e000196 1bff error on your Canon ImageRunner 2030 printer and continue using it without any further issues. Good luck!