DIY 1984 Buick Lesabre Driver Side Armrest Removal

If you own a 1984 Buick Lesabre and need to remove the driver side armrest, this do-it-yourself guide will provide you with step-by-step instructions. Removing the armrest can be necessary for repairs or upgrades, and by following these simple steps, you can do it yourself at home.

Tools You Will Need:

• Phillips screwdriver
• Flathead screwdriver
• Needle-nose pliers
• Tape or cloth for protection

Step 1: Prepare the Area

First, ensure that your car is parked in a safe and level area. Roll down the driver side window for better access and remove any belongings from the armrest area. It's also a good idea to cover the area surrounding the armrest with tape or a cloth to prevent any scratches or damage during the removal process.

Step 2: Locate and Remove Screws

Look for the screws that hold the armrest in place. These screws are typically found on the bottom or sides of the armrest. Use your Phillips screwdriver to carefully remove these screws, making sure to keep them in a safe place as you will need them later for reinstallation.

Step 3: Pry Open the Armrest Panel

Once the screws have been removed, use a flathead screwdriver to gently pry open the armrest panel. Start from the bottom and work your way up, being careful not to damage any surrounding components. This should expose the inner mechanisms of the armrest.

Step 4: Disconnect Electrical Connections

If your Buick Lesabre is equipped with power controls such as window switches or other functions, locate the electrical connection that powers the armrest. Use needle-nose pliers to carefully disconnect this connection. Remember to handle electrical components with caution to prevent any accidents or damage.

Step 5: Remove the Armrest

With the screws removed and electrical connections disconnected, the armrest should now be free from its attachments. Lift up the armrest gently, ensuring you don't strain any wires or cables, and remove it completely from your vehicle.

Step 6: Reinstallation (if needed)

If you are replacing the armrest or need to reattach it after repairs, follow the steps in reverse order. Connect any electrical connections, align the armrest with its original position, and reinsert the screws tightly but without over-tightening them. Double-check that all components are in their correct place before testing the armrest's functionality.

Now that you have successfully removed the driver side armrest from your 1984 Buick Lesabre, you can proceed with any necessary repairs or upgrades. Remember, always exercise caution, and if you feel unsure at any point during the process, it's best to consult a professional or a Buick specialist for guidance.