LG Washer Error Code Causes: Troubleshooting Common Issues

Modern washing machines have greatly simplified the task of doing laundry, but sometimes they can encounter errors that can leave us scratching our heads. If you own an LG washer and are seeing error codes on the display, it is important to understand their causes and potential solutions. In this article, we will explore some of the most common LG washer error codes and their likely causes.

1. Error Code IE

The IE error code indicates a water inlet problem. This could be due to a clogged or improperly connected water inlet valve, low water pressure, or a faulty water level sensor. To troubleshoot, check the water supply hoses for any kinks, ensure the water faucets are fully turned on, and make sure the inlet valve filters are clean. If the issue persists, it is advisable to contact a professional technician.

2. Error Code UE

The UE error code stands for an unbalanced load. This typically occurs when the washer cannot distribute the laundry evenly inside the drum. Overloading the machine or adding bulky items to small loads can trigger this error. Ensure that the load is properly balanced and redistribute the clothes if necessary. Additionally, try washing larger items separately to prevent the UE error from recurring.

3. Error Code OE

The OE error code signifies a drainage problem. This can be caused by a clogged drain hose, a blocked filter, or a faulty drain pump. Check the drain hose for any obstructions and make sure it is not kinked or damaged. Clean the drain filter and ensure it is properly seated. If these steps do not resolve the issue, it may be necessary to call a technician to inspect and possibly replace the drain pump.

4. Error Code LE

The LE error code indicates a problem with the motor or motor control circuit. It is often caused by excessive suds due to using too much detergent or the wrong type of detergent. Start by unplugging the machine and allowing it to sit for about 30 minutes to reset. Check for any visible signs of detergent residue around the door and clean it if necessary. Adjusting the detergent amount and using high-efficiency (HE) detergent can prevent a recurrence of the LE error.

5. Error Code PE

The PE error code indicates a water level sensor problem. This can be due to a faulty sensor, an obstruction in the air tube, or water leakages. First, inspect the air tube for any damage or disconnections. Clean it thoroughly to remove any dirt or debris. If the issue persists, it may require replacing the water level sensor to resolve the problem.

Remember, these are just a few of the many error codes that an LG washer may display. If you encounter a different error or the troubleshooting steps mentioned above do not resolve the issue, it is recommended to consult the user manual or contact LG's customer support for further assistance.

Having an understanding of these common LG washer error codes and their causes can help you troubleshoot the problem efficiently. By following the suggested steps, you may be able to resolve some of these issues on your own. However, if you are unsure or the problem persists, it is best to seek professional help to ensure a safe and proper fix.