LG Washer Error Code Solutions

LG is a renowned brand known for its innovative and high-performance appliances, including washers. However, like any other electronic device, LG washers might encounter error codes from time to time. These error codes are essentially the washer's way of communicating an issue. In this article, we will explore some common LG washer error codes and their respective solutions.

Error Code: UE

The UE error code typically indicates an unbalanced load. This can occur when there is either too much laundry in the machine or a single heavy item, such as a blanket or comforter, being washed. To address this issue, try the following:

• Pause the cycle and redistribute the load evenly. Ensure bulky items are spread out and not clumped together.
• Remove any large items like blankets and wash them separately.
• Check if the washer is level by using a bubble level. Adjust the feet accordingly to ensure it is balanced.

Error Code: OE

The OE error code signifies a drainage problem. If your washer is displaying this error, follow these steps:

• Turn off and unplug the machine to ensure safety.
• Check if the drain hose is clogged or bent. Straighten or clean it if necessary.
• Inspect the drain filter for any blockage. Remove any debris or foreign objects trapped in it.
• Make sure the drainage system is not obstructed. Ensure the standpipe or laundry sink is not blocked.

Error Code: LE

The LE error code points to a motor overload issue. To resolve this error, consider the following solutions:

• Turn off the washer and unplug it for about 30 minutes to allow the motor to cool down.
• Reduce the load size if it is too heavy. Distribute the laundry evenly in the washer drum.
• Check if the washer drum is clogged or has any foreign objects. Remove them if present.
• Verify that the motor connector wires are securely connected. Unplug and plug them back in to ensure a tight connection.

Error Code: IE

The IE error code indicates a water inlet problem. If you encounter this error, try the following:

• Ensure that the water inlet valves are fully opened and the water supply is functioning properly.
• Inspect the inlet hoses for any kinks or blockages. Straighten the hoses and clean the filters if necessary.
• Verify that the hose connections are securely tightened.
• Check if the water pressure in your home is adequate for the washer.

These are just a few examples of common LG washer error codes and their solutions. However, it is vital to consult the official LG washer manual or contact customer support for specific error codes as certain codes may require professional assistance.