How to reset Samsung washer maintenance mode?

How to Reset Samsung Washer Maintenance Mode - A Step-by-Step Guide

How to Reset Samsung Washer Maintenance Mode - A Step-by-Step Guide

If your Samsung washer is stuck in maintenance mode and you're looking for a solution to reset it, you've come to the right place. This step-by-step guide will walk you through the process of resetting Samsung washer maintenance mode.

1. Power Off the Washer

The first step is to turn off the power to your Samsung washer. Locate the power button or unplug the washer from the electrical outlet. Wait for a few minutes to ensure that the electricity is completely disconnected.

2. Access the Maintenance Mode

Next, you need to access the maintenance mode of your Samsung washer. Press and hold the following buttons simultaneously: Delay End + Pre-Wash + Pre-Wash + Delay End. Keep holding the buttons until the maintenance mode appears on the display.

3. Navigate the Maintenance Mode

Now that you are in maintenance mode, use the buttons on the control panel to navigate through the options. Press the Temp. button to move to the next option, and the Spin button to scroll through the available settings. Look for the option that says "Exit" or "End." This is the option you need to select to exit maintenance mode.

4. Exit Maintenance Mode

Once you have found the "Exit" or "End" option, press the Power button to confirm your selection and exit maintenance mode. This will restart the washer and should reset it to its normal operating mode.

5. Test the Washer

After the reset, it's a good idea to test your Samsung washer to ensure that it is functioning properly. Run a test cycle or a regular load to check if any issues persist.

6. Contact Samsung Support if Necessary

If you have followed these steps but are still experiencing problems with your Samsung washer or if it continues to get stuck in maintenance mode, it's recommended to reach out to Samsung support for further assistance. They may be able to provide additional troubleshooting steps or arrange for a service technician to inspect your washer.

By following these steps, you should be able to successfully reset your Samsung washer from maintenance mode. Remember to always refer to your washer's user manual for any specific instructions or warnings provided by the manufacturer.