Bmw 316ci Motor Oil Capacity Specification

Bmw 316ci Motor Oil Capacity Specification

The BMW 316ci has a motor oil capacity of 6.5 liters. This includes the oil in the engine, the oil filter, and the oil pan.

Question 1: What type of oil should I use in my BMW 316ci?

Answer 1: BMW recommends using SAE 5W-30 oil in the 316ci. This oil is designed to provide optimal performance in a variety of weather conditions.

Question 2: How often should I change the oil in my BMW 316ci?

Answer 2: BMW recommends changing the oil in the 316ci every 10,000 miles or 12 months, whichever comes first. However, if you drive in dusty or extreme conditions, you may need to change the oil more often.

Additional information:

• The BMW 316ci uses a S65 engine, which is a 2.0-liter inline-4 engine.
• The oil filter is located on the top of the engine.
• To change the oil in the 316ci, you will need an oil pan drain plug wrench, an oil filter wrench, and a funnel.

Here are some tips for changing the oil in your BMW 316ci:

• Park your car on a level surface.
• Turn off the engine and let it cool down.
• Open the hood and locate the oil drain plug.
• Place a drain pan under the oil drain plug.
• Use the oil pan drain plug wrench to loosen the oil drain plug.
• Allow the oil to drain into the drain pan.
• Once the oil has drained, replace the oil drain plug and tighten it with the oil pan drain plug wrench.
• Locate the oil filter.
• Use the oil filter wrench to loosen the oil filter.
• Allow the oil to drain from the oil filter.
• Apply a thin coat of new oil to the gasket of the new oil filter.
• Screw on the new oil filter by hand until it is snug.
• Remove the oil filler cap.
• Pour new oil into the engine.
• Replace the oil filler cap.
• Start the engine and let it run for a few minutes.
• Check the oil level and add more oil if necessary.

By following these tips, you can ensure that your BMW 316ci has the correct amount of oil and that the oil is changed regularly.