Oil Change DIY for BMW 220i Active Tourer

The BMW 220i Active Tourer is a versatile and popular vehicle known for its luxurious features and impressive performance. To keep your BMW running smoothly, one essential maintenance task is an oil change. Although you can always take your car to a mechanic for an oil change, it is also possible to perform this DIY task for those who enjoy working on their vehicles themselves. Here is a step-by-step guide on how to change the oil on your BMW 220i Active Tourer.

Step 1: Gather the Required Materials

Before you begin, make sure you have all the necessary tools and materials. These include:

• Oil filter
• Oil drain pan
• New oil (check your owner's manual for the recommended oil type and quantity)
• Oil filter wrench
• Jack or ramps for lifting the car
• Socket set
• Oil filter drain tool (if needed)
• New crush washer for the drain plug (if needed)

Step 2: Prepare your Vehicle

Park your BMW on a level surface and engage the parking brake. Ensure the engine is cool before starting the oil change process.

Step 3: Jack up the Vehicle

Use a jack or ramps to raise the front of your BMW 220i. Secure it properly to prevent any accidents while working underneath your vehicle.

Step 4: Locate the Oil Drain Plug and Oil Filter

The oil drain plug is typically located on the bottom of the engine oil pan. The oil filter is usually situated nearby. Refer to your owner's manual or consult online resources for the exact locations.

Step 5: Drain the Old Oil

Place the oil drain pan underneath the oil drain plug and unscrew the plug using a socket wrench. Allow the old oil to drain completely. If necessary, use an oil filter drain tool to remove the old oil filter as well.

Step 6: Replace the Oil Filter

Take the new oil filter and lubricate the gasket with fresh oil. Then screw it on carefully by hand. Be sure not to overtighten it.

Step 7: Install the Drain Plug

Once the old oil has finished draining, install a new crush washer on the drain plug (if needed) before screwing it back into place. Tighten the drain plug securely, but again, be cautious not to overtighten.

Step 8: Add the New Oil

Locate the oil cap on top of the engine and remove it. Use a funnel to pour the correct amount and type of fresh oil into the engine. Refer to your owner's manual for specific instructions.

Step 9: Check the Oil Level

Once you've added the new oil, start the engine and let it run for a few minutes. Turn off the engine and wait for a brief period to allow the oil to settle. Then, use the dipstick to check the oil level. Add more if necessary.

Step 10: Clean Up

Dispose of the old oil responsibly and clean up any spills or drips using appropriate materials. Remember to recycle the used oil and oil filter at a local recycling center.

Congratulations! You have successfully changed the oil on your BMW 220i Active Tourer. Regularly performing this task will help maintain the performance and longevity of your vehicle, granting you many more enjoyable journeys in the future.