Self Replace Kyocera Battery

Do you own a Kyocera device with a worn-out battery? Instead of visiting a service center or spending money on professional battery replacement, you can easily replace the battery yourself. This article will guide you through the necessary steps to successfully replace your Kyocera battery.

Step 1: Gather the Required Tools

Before you start the replacement process, make sure you have the following tools ready:

• Small screwdriver set
• Plastic prying tool or a guitar pick
• Replacement battery compatible with your Kyocera device

Step 2: Power Off Your Kyocera Device

Make sure your Kyocera device is powered off. This is a crucial step to avoid any potential electrical hazards during the replacement process.

Step 3: Remove the Back Cover

Using a small screwdriver, gently unscrew the screws securing the back cover of your Kyocera device. Put the screws aside in a secure place. Once the screws are removed, use a plastic prying tool or a guitar pick to carefully pry off the back cover. Take your time and be gentle to avoid any damage to the device.

Step 4: Locate and Remove the Battery

After removing the back cover, you will find the battery. Look for any connectors or clips holding the battery in place. Carefully disconnect these connectors or release the clips to free the battery from its position.

Step 5: Replace the Old Battery

Take the replacement battery that is compatible with your Kyocera device and insert it into the battery compartment. Ensure it is securely in place and reconnect any connectors or clips that were detached in the previous step.

Step 6: Reattach the Back Cover

Align the back cover with the device and gently press it back into position. Use the small screws you removed earlier to secure the back cover. Make sure not to overtighten the screws.

Step 7: Power On and Test

Finally, power on your Kyocera device and check if the new battery is functioning properly. If everything is working as expected, congratulations! You have successfully replaced your Kyocera battery.

Note: If you face any difficulties during the process or if you are unsure about any step, it is recommended to consult the device's user manual or seek professional assistance.

Conclusion

Replacing the battery of your Kyocera device on your own can save you time and money. By following the steps mentioned above and taking necessary precautions, you can easily replace your worn-out battery and enjoy extended usage on your device.