Oil Change Procedure for Grand Voyager

Regular oil changes are essential for maintaining the performance and longevity of your Grand Voyager. By following a proper oil change procedure, you can ensure that your engine stays well-lubricated and protected from wear and tear. Here is a step-by-step guide to help you with the oil change process:

Step 1: Gather the Required Tools and Materials

• Oil filter
• New oil
• Oil drain pan
• Wrench or socket set
• Oil filter wrench (if necessary)
• Rubber gloves
• Rags or paper towels

Step 2: Prepare your Vehicle

• Ensure that your Grand Voyager is parked on a level surface and the engine is cool.
• Place wheel chocks behind the rear tires to prevent any accidental rolling.
• Open the hood and locate the oil filler cap.
• Remove the oil filler cap to allow proper drainage during the oil change.
• Position the oil drain pan under the oil drain plug.

Step 3: Drain the Old Oil

• Using a wrench or socket set, loosen the oil drain plug underneath the vehicle's engine.
• Let the old oil flow into the drain pan until it completely drains out.
• Once drained, securely tighten the oil drain plug back into place.

Step 4: Replace the Oil Filter

• Locate the old oil filter, which is typically located near the oil drain plug.
• Using an oil filter wrench, carefully remove the old oil filter by turning it counterclockwise.
• Wipe the filter mounting surface clean with a rag or paper towel.
• Apply a thin layer of new oil to the rubber gasket of the new oil filter.
• Screw on the new oil filter by hand, turning clockwise until it is snug. Avoid overtightening.

Step 5: Add Fresh Oil

• Refer to your Grand Voyager's owner's manual for the recommended oil type and quantity.
• Remove the oil filler cap and carefully pour the new oil into the engine using a funnel.
• Once filled, replace the oil filler cap securely.

Step 6: Check the Oil Level

• Start your Grand Voyager and let the engine run for a few minutes.
• Turn off the engine and wait for a few minutes to allow the oil to settle.
• Check the oil level using the dipstick, ensuring it falls within the recommended range.
• If necessary, add more oil to reach the optimal level.

Step 7: Dispose of the Old Oil

• Pour the used oil into a sealable container and take it to a local recycling center or an auto parts store that accepts used oil.

Following these step-by-step instructions will help you perform an oil change on your Grand Voyager efficiently. Remember to always follow the guidelines provided in your vehicle's owner's manual and take the necessary safety precautions to ensure a successful oil change procedure.