How to troubleshoot Maytag washer F28 error?

How to Troubleshoot Maytag Washer F28 Error | Step-by-Step Guide

How to Troubleshoot Maytag Washer F28 Error?

Maytag washers are known for their exceptional performance and reliability. However, like any other appliance, they may encounter certain issues over time. One of the common problems faced by Maytag washer owners is the F28 error code, which indicates a communication error between the main control board and the motor control board.

If you've encountered the F28 error on your Maytag washer, don't worry! This comprehensive guide will assist you in troubleshooting the problem and potentially resolving it without the need for professional assistance.

Step 1: Power Reset

The first step in troubleshooting the F28 error code is to perform a power reset. To do this:

• Unplug the washer from the power outlet.
• Wait for a few minutes.
• Plug the washer back into the power outlet.

Once the power reset is complete, check if the F28 error reappears. If it does, proceed to the next step.

Step 2: Check the Wiring Connections

The F28 error code can occur due to loose or faulty wiring connections. Inspect the wiring harness between the main control board and the motor control board. Ensure that all connections are secure and free from damage.

If you find any loose or damaged wires, reconnect or replace them as necessary. After checking the wiring connections, test the washer to see if the error persists.

Step 3: Inspect the Motor Control Board

If the error persists, the next step is to inspect the motor control board. Here's how you can do it:

1. Unplug the washer from the power outlet.
2. Locate the motor control board, typically found at the bottom of the washer.
3. Examine the control board for any signs of physical damage, such as burnt components or melted wires.
4. If you notice any visible damage, the motor control board may need to be replaced.

However, if there are no visible signs of damage, try resetting the motor control board by unplugging the washer and leaving it unplugged for a few minutes. Plug it back in and check if the F28 error disappears.

Step 4: Check the Main Control Board

If the F28 error still persists, it's time to inspect the main control board. Follow these steps:

1. Unplug the washer from the power outlet.
2. Locate the main control board, usually located behind the control panel.
3. Visually inspect the main control board for any signs of damage.
4. If you find any visible damage, such as burnt spots or faulty components, the main control board may require replacement.

If there is no apparent damage, attempt a reset by unplugging the washer and leaving it unplugged for a few minutes. Plug it back in and check if the F28 error disappears.

Step 5: Seek Professional Assistance

If none of the above troubleshooting steps resolve the F28 error on your Maytag washer, it is recommended to seek professional assistance. A qualified technician will have the expertise and tools to diagnose and fix the problem accurately.

Remember to provide them with the model number and a detailed description of the issue for faster and effective troubleshooting.

By following these troubleshooting steps, you can attempt to resolve the F28 error code on your Maytag washer. However, always prioritize your safety and skill level when dealing with electrical components. If you're unsure or uncomfortable with DIY repairs, it's best to consult a professional.