What are the solutions for Asko washer error codes?

Solutions for Asko Washer Error Codes:

If you are experiencing error codes on your Asko washer, there are several solutions you can try to resolve the issue. Here are some common error codes and their corresponding solutions:

Error Code 01 - Water Inlet Problem:

- Check if the water supply is turned on.

- Ensure that the water inlet hose is not kinked or blocked.

- Clean the filters in the water inlet valve to remove any debris.

Error Code 02 - Drainage Problem:

- Verify if the drain hose is properly connected and not clogged.

- Check if the drain pump is functioning correctly and not blocked by any foreign objects.

- Ensure that the drain hose is installed at the correct height to prevent siphoning.

Error Code 03 - Overfilling Problem:

- Make sure that the water level switch is working correctly.

- Verify if the pressure sensor hose is not kinked or damaged.

- Inspect the pressure sensor for any faults and replace if necessary.

Error Code 04 - Unbalanced Load:

- Rearrange the clothes inside the drum to distribute the weight evenly.

- Add or remove items to achieve a balanced load.

- Ensure that the washer is level and not wobbling during operation.

Error Code 05 - Motor Problem:

- Check if there are any obstructions preventing the motor from spinning.

- Verify if the motor brushes are worn out and need replacement.

- Inspect the motor control board for any faults and replace if necessary.

If the error code persists after trying the suggested solutions, it is recommended to consult the Asko customer support or a professional technician for further assistance.