What are common error messages displayed on Asko washers and how can they be resolved?

Common Error Messages on Asko Washers and How to Resolve Them

Common Error Messages on Asko Washers and How to Resolve Them

Error Message 1: E01

This error indicates a water intake problem. To resolve it, follow these steps:

1. Turn off the washer and disconnect the power supply.
2. Check if there is an adequate water supply and ensure that the water inlet valve is fully open.
3. Clean the water inlet filter if it is clogged.
4. Inspect the water inlet hose for any kinks or blockages and straighten or remove them.
5. Reconnect the power and turn on the washer. The error should be resolved.

Error Message 2: E02

This error indicates a draining problem. Follow these steps to resolve it:

1. Turn off the washer and disconnect the power.
2. Inspect the drain hose for any clogs or obstructions and clear them.
3. Clean the drain pump filter if it is dirty or blocked.
4. Ensure that the drain hose is positioned correctly and not submerged in water or blocked.
5. Reconnect the power and turn on the washer. The error should be resolved.

Error Message 3: E04

This error indicates an issue with the motor or its control. To resolve it, follow these steps:

1. Disconnect the power and turn off the washer.
2. Check for any loose connections on the motor or motor control board and secure them.
3. Inspect the motor for any damage or excessive resistance.
4. If the motor is faulty, it may need to be replaced by a professional technician.
5. Reconnect the power and turn on the washer. If the error persists, contact Asko customer support.

Error Message 4: E11

This error indicates a problem with the door lock. Follow these steps to resolve it:

1. Turn off the washer and disconnect the power supply.
2. Inspect the door lock mechanism for any obstructions or damage. Clean or replace it if necessary.
3. Ensure that the door is closed properly and there are no items blocking it.
4. If the issue persists, the door lock assembly may need to be replaced by a professional.
5. Reconnect the power and turn on the washer. The error should be resolved.

Remember, if the error persists after attempting these solutions, it is recommended to contact Asko customer support or a professional technician for further assistance.