What are some common error codes that may appear on an Asko washer, and how can they be resolved?

Common error codes on an Asko washer and their solutions:

Error code F1: This code typically indicates a water inlet issue. Check that the water supply is connected and turned on properly. If the problem persists, there may be a faulty water inlet valve that needs to be replaced.

Error code F2: F2 points to a drainage problem. Ensure that the drain hose is not kinked or clogged. Clean out any debris in the drain filter and pump. If the issue continues, there may be a faulty drain pump that requires replacement.

Error code F3: F3 signals a temperature sensor malfunction. Check the wiring connections to the sensor and clean any dirt or debris that may be affecting its readings. If the sensor is faulty, it will need to be replaced.

Error code F4: F4 typically indicates a door lock issue. Make sure the door is properly closed and latched. If the problem persists, there may be a faulty door lock mechanism that needs to be repaired or replaced.

Error code F5: F5 suggests a water overflow error. Check the water level sensor and ensure it is functioning correctly. If the sensor is working fine, there may be a problem with the control board that needs to be addressed.

For any error code that you encounter, refer to your Asko washer's manual for specific troubleshooting steps and if necessary, contact a qualified technician for further assistance.