How to change oil in Jeep Patriot?

How to Change Oil in a Jeep Patriot

Introduction:

Regularly changing the oil of your Jeep Patriot is essential for maintaining its performance and prolonging the engine's life. By following a few simple steps, you can carry out this routine maintenance task yourself, saving time and money. In this article, we will guide you through the process of changing the oil in a Jeep Patriot efficiently and effectively.

Materials Required:

• Socket set
• Oil filter wrench
• Oil catch pan
• Funnel
• New oil filter
• New oil
• Rubber gloves
• Ramps or jack stands

Step 1: Prepare Your Jeep Patriot

Park your Jeep Patriot on a flat surface and engage the parking brake. If you have access to ramps, use them to elevate the front end of the vehicle. Alternatively, if working on a level surface, utilize jack stands to lift the front of the car. Ensure the engine is cool to prevent burns and injuries.

Step 2: Locate the Oil Drain Plug and Oil Filter

The oil drain plug is typically located at the bottom of the engine oil pan. Consult your owner's manual or an online resource to identify the exact location. Additionally, find the oil filter, which is typically located near the oil pan or on the side of the engine block.

Step 3: Drain the Oil

Position your oil catch pan beneath the oil drain plug. Using the appropriate socket, typically a 16mm or 17mm, loosen and remove the drain plug. Allow the oil to drain completely into the catch pan. Once the oil has finished draining, wipe off any debris and replace the drain plug securely.

Step 4: Replace the Oil Filter

Using an oil filter wrench, remove the old oil filter. Be prepared for oil spillage, so ensure your catch pan is positioned appropriately. Clean the filter mounting surface, then lubricate the rubber gasket on the new oil filter with fresh oil. Carefully screw on the new oil filter by hand until snug, then give it an additional half-turn using the filter wrench.

Step 5: Add Fresh Oil

Locate the oil filler cap, typically found on top of the engine. Remove the cap and insert a funnel securely. Refer to your owner's manual for the recommended type and quantity of oil. Slowly pour in the fresh oil, allowing it to settle and check the oil level using the dipstick. Repeat this process until the oil level reaches the appropriate level on the dipstick.

Step 6: Clean Up and Dispose of Used Oil Safely

Dispose of your used oil responsibly by transferring it from the oil catch pan into a leak-proof container. Avoid mixing different types of oil. Many auto parts stores offer oil recycling programs, so check with your local store for proper disposal methods. Dispose of the used oil filter in accordance with local regulations.

Conclusion

By following these steps, you can easily change the oil in your Jeep Patriot. Performing this maintenance task at regular intervals will keep your engine running smoothly and contribute to the long-term health of your vehicle. Remember to consult your owner's manual and exercise caution throughout the process. Enjoy the satisfaction of accomplishing this DIY task and the peace of mind that comes with a well-maintained engine.