How to Clear LG Washer Memory

LG washers are equipped with a memory function that stores various data such as wash cycles, settings, and error codes. Clearing the memory on your LG washer can be helpful if you want to start fresh or troubleshoot any recurring issues. Follow the steps below to clear the memory on your LG washer:

Step 1: Power off the Washer

Make sure your LG washer is powered off. You can unplug it from the electrical outlet or simply switch it off using the power button.

Step 2: Press and Hold the Start/Pause Button

Locate the Start/Pause button on your LG washer's control panel. Press and hold this button for approximately five seconds.

Step 3: Release the Start/Pause Button

After holding the Start/Pause button for five seconds, release it. You should see the washer's control panel light up, indicating that the memory has been successfully cleared.

Step 4: Power on the Washer

Once you've released the Start/Pause button, power on your LG washer by plugging it back into the electrical outlet or using the power button.

Step 5: Verify Memory Clearance

To ensure that the memory has been cleared, perform a test cycle on your LG washer. Select a wash cycle and initiate it as you normally would. If the washer starts without any error codes or previously saved settings, it means the memory has been successfully cleared.

Clearing the memory on your LG washer can help resolve issues related to error codes, software glitches, or faulty settings. By following the steps above, you can easily clear the memory and start fresh with your LG washer.

Note: Clearing the memory will reset any customized settings you have saved, so be prepared to reconfigure them after the process.