Whirlpool Washer Error Codes List

If you own a Whirlpool washer, you may come across various error codes that indicate different issues or malfunctions within the machine. These error codes are helpful in troubleshooting and identifying the problem, allowing you to take appropriate actions to fix it. Below is a comprehensive list of Whirlpool washer error codes along with their meanings:

Error Code F1

This error code suggests a faulty control board. The control board may need to be replaced to resolve this issue.

Error Code F02

F02 indicates drainage issues. Inspect the drain hose for clogs or kinks and ensure it is draining properly. Clean the filter if necessary.

Error Code F03

This error occurs when the washer is unable to drain the water. Check the drain pump and its connections for any blockages or damage. Clear the obstruction or replace the drain pump if needed.

Error Code F06

F06 indicates a problem with the motor drive tachometer. Check the wiring connections between the motor and the control board. If no issues are found, consider replacing the motor or the control board.

Error Code F08

F08 signifies an issue with the heater relay. Inspect the wiring connections and the relay itself, and replace them if necessary.

Error Code F09

This error code indicates a communication problem between the central control unit (CCU) and the motor control unit (MCU). It may be necessary to replace either the CCU or the MCU.

Error Code F11

F11 suggests a communication issue between the main control board and the motor control board. Inspect the wiring connections, and if no problems are found, consider replacing one or both of the control boards.

Error Code F20

F20 indicates a water inlet problem. Check the water supply valves and hoses for proper installation and water flow. Replace any damaged parts if required.

Error Code F21

This error code appears when the washer is unable to drain within a specific time. Inspect the drain hose for clogs or kinks and ensure the pump is working correctly. Clean or replace the pump as needed.

Error Code F22

F22 indicates a door lock failure. Make sure the door is closed correctly and check the latch for any damage. Replace the door lock if necessary.

• F23: This error suggests a problem with the thermistor or the connection between the thermistor and the control board.
• F24: F24 signifies a water temperature sensor error. Inspect the connections and replace the sensor if required.
• F25: F25 indicates a drive motor tachometer error. Inspect the wiring connections between the motor and the control board, and replace the motor if necessary.
• F32: This error code suggests a pressure switch or pressure sensor issue. Inspect and test these components, replacing them if needed.
• F33: F33 appears when the washer's pump drive system malfunctions. Check the wiring connections, and if necessary, replace the pump drive system.

This is just a selection of Whirlpool washer error codes. Remember to refer to your washer's specific model and user manual for a complete list of error codes and further troubleshooting instructions.

By familiarizing yourself with these error codes, you can quickly diagnose any problems with your Whirlpool washer and ensure it is running efficiently once again.