How to Fix SR Error on Whirlpool Calypso Washer

If you own a Whirlpool Calypso washer and have encountered the SR error code, don't worry! This article will guide you through the steps to fix this error and get your washer back up and running smoothly.

What is the SR Error?

The SR error on a Whirlpool Calypso washer refers to a "Stuck Relay" issue. It usually occurs when the washer's control board fails to communicate with the motor control board. This can happen due to a variety of reasons, such as loose connections or a faulty control board.

Fixing the SR Error

Here are the steps you can follow to fix the SR error on your Whirlpool Calypso washer:

Step 1: Turn off the Washer

Start by turning off the washer and unplugging it from the power outlet. This will ensure your safety during the troubleshooting process.

Step 2: Check Connections

Next, carefully inspect the connections between the control board and the motor control board. Make sure they are securely plugged in and not loose. If you notice any loose connections, gently reconnect them.

Step 3: Restart the Washer

Now, plug the washer back into the power outlet and turn it on. Check if the SR error code is still being displayed. If the error persists, move on to the next step.

Step 4: Reset the Washer

To reset the washer, press the "Stop" button twice and then press and hold the "Start" button for a few seconds. This should initiate a system reset, which might resolve the SR error code. Check if the error disappears and the washer is functioning normally again.

Step 5: Replace Control Board (if necessary)

If none of the above steps fix the SR error, it is possible that the control board or the motor control board is faulty. In such cases, it is recommended to consult a professional technician or contact Whirlpool customer support to replace or repair these components.

Preventing Future Errors

To avoid encountering the SR error or any other issues with your Whirlpool Calypso washer in the future, make sure to:

• Regularly clean and maintain your washer according to the manufacturer's instructions.
• Avoid overloading the washer with excessive laundry, as it can strain the motor and cause errors.
• Check and tighten all connections periodically to prevent any loose connections.

By following these preventive measures, you can keep your Whirlpool Calypso washer in optimal condition and minimize the chances of encountering errors like SR in the future.

Remember, if you are unsure about any step or lack technical expertise, it is always best to seek professional help for repairs to ensure your safety and prevent further damage to your washer.