MAYTAG Stackable A/W and Dryer Fault Codes
MAYTAG Washing and drayer Machines Failure Codes. Read and learn Conditions, Check and Repairs.
Subject: MAYTAG Appliances - Sub Subject: Washing and Dryer MachinesDate: 3/22/2019 Status: SOLVED
7 answered / 14 voted,
325 viewed.
technician - Wednesday, April 10, 2019 392Condition: Lid lock failure
Check/Repair: Replace switch, linkage, lock solenoid or control board.
Failure Code : U occurs for no reason in display
Condition: Unbalanced load
Check/Repair: Unbalance switch or control board
Failure Code : 1E persists in washer display
Condition: Lid lock failure
Check/Repair: Replace lid lock switch or control board.
Failure Code : 6E appears in dryer display
Condition: Temp control error
Check/Repair:
Ambient (room) temperature too cool, -or-
- thermistor
- wire harness
- control board
Failure Code : 7E appears in dryer display
Condition: Temp control error overheating
Check/Repair:
- venting for restriction
- thermistor
- control board
- cycling thermostat (regular)
Failure Code : 8E appears in dryer display
Condition: Motor relay circuit
Check/Repair:
- Relay coil
- Wire harness or
- Control board
Failure Code : 9E appears in dryer display
Condition: Door switch failure
Check/Repair: Check door switch wiring or door switch or control board
The best ReplyANSWERS Write an Answer
❝MAYTAG Stackable A/W and Dryer Fault Codes❞ answers. technician asked first. Total 7 replies.
Failure Code : L persists in washer display
Condition: Lid lock failure
Check/Repair: Replace switch, linkage, lock solenoid or control board.
I was getting the error code. I solved my problem thanks to this place, thank you very much.
2
0How Do I resolve the Maytag Dryer error code?
Maytag Bravos dryererror codes
Maytag - 7 Cu. Ft. 12-Cycle Electric Dryer - White
MAYTAG Appliances / Washing and Dryer Machines Electronic controls; 12 drying programs; front loading type; powder coated drum
Error Code: PF
Condition: Power failure
Advice: A power failure occurred while the dryer was running. Press Start to continue the cycle or press Stop to clear the display. If this code frequently appears, check the power cord and replace it if it's damaged.
Error Code: F-01
Condition: Main electronic control board failure
Advice: Unplug the dryer for 5 minutes and the plug the dryer back in. If the code reappears, replace the main electronic control board.
Error Code: F-02
Condition: User interface keypad failure
Advice: A stuck button on the user interface control board causes this code. If you can't free the stuck key, replace the user interface control board.
Error Code: F-22
Condition: Exhaust thermistor failure
Advice: Unplug the dryer. Check the resistance of the exhaust thermistor (temperature sensor). It should measure about 10,000 ohms at room temperature. If the thermistor is defective, replace it.
Error Code: F-23
Condition: Exhaust thermistor failure
Advice: Unplug the dryer. Check the resistance of the exhaust thermistor (temperature sensor). It should measure about 10,000 ohms at room temperature. If the thermistor is defective, replace it.
Error Code: F-26
Condition: Drive motor failure
Advice: Unplug the dryer. Check the wiring connections between the main electronic control board and the drive motor. If the wiring connections are sound, replace the drive motor.
Error Code: F-28
Condition: Moisture sensor failure
Advice: Check the wiring harness connections between the moisture sensor and the main electronic control board. If the wiring connections are sound, replace the moisture sensor.
Error Code: F29
Condition: Moisture sensor failure
Advice: Check the wiring harness connections between the moisture sensor and the main electronic control board. If the wiring connections are sound, replace the moisture sensor.
1 0🚙 Naperville,Illinois?
0 0 0 0i'm here: Louisville, KY?
0 0 0 0Similar Questions
My Breville microwave not heat anything
Hi i have a Breville microwave, all the functions are working as normal but my food is not getting hot at all, I dont understand microwaves but would love to be able fix it myself, can you help me with the diagnosis please?
Breville / Microwave Answers: 7 509
How do I fix H2O error code on GE dishwasher?
How do I fix H2O error code on GE dishwasher: Indicates a low water situation. If H2O only appears during 1-Hour Wash, schedule service. Feel free to run any other cycle until that update is done.
GE / Dishwasher Answers: 8 3628
How do I fix 999 error code on GE dishwasher?
How do I fix 999 error code on GE dishwasher; Possible leak detected on models with “Floor Protect with Alert” feature. All others: The unit’s control needs to be reset.
GE / Dishwasher Answers: 7 634
How do I fix Leak Detected error code on GE dishwasher?
How do I fix Leak Detected error code on GE dishwasher; Possible leak is detected. The cycle will be cancelled on models with leak detection. If LEAK DETECTED is displayed, contact service.
GE / Dishwasher Answers: 7 504
How do I fix C8 error code on GE dishwasher?
How do I fix C8 error code on GE dishwasher; This display indicates that the detergent cup is blocked from opening fully. Remove obstruction (i.e. silverware, pan). Relatch door and wait 30 seconds for cup to open.
GE / Dishwasher Answers: 7 342
How do I fix C7 error code on GE dishwasher?
How do I fix C7 error code on GE dishwasher; The dishwasher’s water temperature sensor circuit has become inoperative. Disconnect the power at the circuit breaker for about 30 seconds and then reset the dishwasher.
GE / Dishwasher Answers: 8 391
How do I fix C6 error code on GE dishwasher?
How do I fix C6 error code on GE dishwasher; Water temperature is too low. Water temperature coming into the dishwasher should be at least 120 degrees F. Run the faucet adjacent to the dishwasher prior to starting the dishwasher to purge any cold water from the line. Adjust the water heater tem
GE / Dishwasher Answers: 7 320
How do I fix C5 error code on GE dishwasher?
How do I fix C5 error code on GE dishwasher; The pump out time is too short. Make sure that the water supply is turned on. Try the same cycle again. Tap on the float cover to unstick the float. This is the plastic cover that looks like an upside down cup in the front left corner of the floor of t
GE / Dishwasher Answers: 7 532
How do I fix C4 error code on GE dishwasher?
How do I fix C4 error code on GE dishwasher; Machine filled twice after a power failure. Float switch stuck or failed. Clogged drain or sump. Touch start and then cancel/reset. Tap on the float cover to unstick the float. This is the plastic cover that looks like an upside down cup in the front l
GE / Dishwasher Answers: 4 301
How do I fix C3 error code on GE dishwasher?
How do I fix C3 error code on GE dishwasher; The dishwasher will not drain. Disconnect power, reset the dishwasher.
GE / Dishwasher Answers: 5 304
Similar Articles
Microsoft OLE DB Provider for ODBC Drivers
error '80004005'[MySQL][ODBC 8.0(w) Driver][mysqld-8.0.44]Can't find FULLTEXT index matching the column list
/soru.asp, line 513