What are Whirlpool washer error codes?

Whirlpool Washer Error Codes

When using a Whirlpool washer, you may encounter error codes that indicate specific problems with the machine. These error codes are designed to help you identify and troubleshoot issues more easily. Here are some common Whirlpool washer error codes:

Error Code F1

This error code indicates a primary control failure. It typically means that the machine's main control board needs to be replaced.

Error Code F2

Error code F2 points to a problem with the washer's drain pump. It suggests that there may be a blockage or a malfunction with the pump. Clearing the blockage or replacing the drain pump may be necessary.

Error Code F3

Error code F3 signifies an issue with the washer's water temperature sensor. This error may occur if the sensor is faulty or the wiring is damaged. Replacing the temperature sensor or fixing any wiring problems should resolve the issue.

Error Code F4

Error code F4 indicates a problem with the washer's water inlet valve. This valve controls the flow of water into the machine. If the valve is defective or obstructed, it may need to be cleaned or replaced.

Error Code F5

The F5 error code typically points to a problem with the washer's door lock. This error may occur if the door is not fully closed or the lock mechanism is faulty. Ensuring that the door is properly closed or replacing the door lock mechanism should resolve the issue.

Error Code F6

Error code F6 suggests a communication error between the main control board and the motor control board. This issue may require professional assistance to diagnose and repair.

It's important to understand that these error codes may vary depending on the specific Whirlpool washer model. Consult your washer's user manual for the accurate error code and recommended actions to address the issue.