nav icon Tepte

hide icon
LOGIN
ASK ME! POST AD!

Home - Appliances - WHIRLPOOL

F/09 Failure Code WHIRLPOOL Duet Duet HT

Error F/09 WHIRLPOOL Duet Duet HT Failure Code. Overflow Condition

Subject: WHIRLPOOL - Sub Subject: Duet & Duet HT
Date: 4/11/2019 Status: ACTIVE
loader icon
5 out of 5 - 1 ratings
Viewed view icon 14 times.

ANSWERS Write an Answer

❝F/09 Failure Code WHIRLPOOL Duet Duet HT❞ answers. technician asked first. Total 2 replies.

technician - 4/11/2019 5:35:41 PM
Failure Code: F/09

Condition:Overflow Condition
If the Overflow contact on the pressure switch is Closed for more than 60 seconds and Overflow condition will occur. In an Overflow condition, the Door will remain locked, and the Drain Pump will run constantly, even if PAUSE/CANCEL is pressed twice and the Display is cleared. Unplug the unit to service.

Check/Repair:
- Check the drain hose and make sure it is not plugged or inked.
- Check Wire Harness connectors to the Drain Pump, Pressure Switch, and Central Control Unit (CCU)
- Check/Clean Drain Pump Filter of foreign objects
- Check for Drain Pump Failure
- Check the Inlet Valve for proper shut off
- Check the Pressure switch for proper operation
Did you find this helpful? like icon 0dislike icon 0
Askme - 3/2/2020 3:01:29 AM

Whirlpool Duet Washer Error Code E01 F09


Whirlpool Duet Washer Error Code E01 F09


WHIRLPOOL / Duet & Duet HT Whirlpool Duet Washer Error Code E01 F09 means LONG DRAIN TIME. When your Whirlpool washer goes into drain mode and the drain time is past 8 minutes and not reaching the reset level in the pressure sensor then the valves in the drain are turned off and the drain pump will cease to pump out the water.

Did you find this helpful? like icon 0dislike icon 0

Similar Questions

My Breville microwave not heat anything

Hi i have a Breville microwave, all the functions are working as normal but my food is not getting hot at all, I dont understand microwaves but would love to be able fix it myself, can you help me with the diagnosis please?

Breville / Microwave Answers: 0 view icon 7

How do I fix H2O error code on GE dishwasher?

How do I fix H2O error code on GE dishwasher: Indicates a low water situation. If H2O only appears during 1-Hour Wash, schedule service. Feel free to run any other cycle until that update is done.

GE / Dishwasher Answers: 1 view icon 235

How do I fix 999 error code on GE dishwasher?

How do I fix 999 error code on GE dishwasher; Possible leak detected on models with “Floor Protect with Alert” feature. All others: The unit’s control needs to be reset.

GE / Dishwasher Answers: 1 view icon 47

How do I fix Leak Detected error code on GE dishwasher?

How do I fix Leak Detected error code on GE dishwasher; Possible leak is detected. The cycle will be cancelled on models with leak detection. If LEAK DETECTED is displayed, contact service.

GE / Dishwasher Answers: 1 view icon 38

How do I fix C8 error code on GE dishwasher?

How do I fix C8 error code on GE dishwasher; This display indicates that the detergent cup is blocked from opening fully. Remove obstruction (i.e. silverware, pan). Relatch door and wait 30 seconds for cup to open.

GE / Dishwasher Answers: 1 view icon 38

How do I fix C7 error code on GE dishwasher?

How do I fix C7 error code on GE dishwasher; The dishwasher’s water temperature sensor circuit has become inoperative. Disconnect the power at the circuit breaker for about 30 seconds and then reset the dishwasher.

GE / Dishwasher Answers: 1 view icon 16

How do I fix C6 error code on GE dishwasher?

How do I fix C6 error code on GE dishwasher; Water temperature is too low. Water temperature coming into the dishwasher should be at least 120 degrees F. Run the faucet adjacent to the dishwasher prior to starting the dishwasher to purge any cold water from the line. Adjust the water heater tem

GE / Dishwasher Answers: 1 view icon 15

How do I fix C5 error code on GE dishwasher?

How do I fix C5 error code on GE dishwasher; The pump out time is too short. Make sure that the water supply is turned on. Try the same cycle again. Tap on the float cover to unstick the float. This is the plastic cover that looks like an upside down cup in the front left corner of the floor of t

GE / Dishwasher Answers: 1 view icon 12

How do I fix C4 error code on GE dishwasher?

How do I fix C4 error code on GE dishwasher; Machine filled twice after a power failure. Float switch stuck or failed. Clogged drain or sump. Touch start and then cancel/reset. Tap on the float cover to unstick the float. This is the plastic cover that looks like an upside down cup in the front l

GE / Dishwasher Answers: 1 view icon 25

How do I fix C3 error code on GE dishwasher?

How do I fix C3 error code on GE dishwasher; The dishwasher will not drain. Disconnect power, reset the dishwasher.

GE / Dishwasher Answers: 1 view icon 7

Similar Articles

Whirlpool All-In-One Washer Dryer Error Code and Troubleshooter

Whirlpool All-In-One Washer Dryer Error Code and TroubleshooterF0E1 - Error Code - All-In-One Washer Dryer ​Clothing in machine for Clean WasherThe F0

view icon 133

Whirlpool Electric Ranges Cleaning and Maintenance Information

Whirlpool Electric Cookers Cleaning and Maintenance InformationExteriorCleaning Black Stainless Steel - Electric RangesHow to CleanBlack Stainless Ste

view icon 10

Whirlpool Electric Ranges Oven Control Error Code Fault Code or Message

Whirlpool Electric Ranges Oven Control Error Code Fault Code or MessageWhirlpool Electric Ranges Oven Control App Error MessageFC E1 - Electric Ranges

view icon 40

Whirlpool Dishwashers Before 2019 Error Code and Flashing Lights

Whirlpool Dishwashers Before 2019 Error Code and Flashing LightsWhirlpool Dishwashers Before 2019 Error CodeF2E2- DishwasherCycle power to the control

view icon 652

Whirlpool All-In-One Washer Dryer Cleaning and Maintenance Information

Whirlpool All-In-One Washer Dryer Cleaning and Maintenance InformationCleaning the Door Seal - All-In-One Washer DryerPossible SolutionsCleaning the D

view icon 15

Tepte.com

tepte.com ©2022

Warning!

tepte.com is an online platform to share information and its content is created by its members. Therefore, our site is not responsible for any error happening after your actions according to the information you may find in the content.