What are some common error codes for Asko washers and their corresponding troubleshooting steps?

Common Error Codes for Asko Washers and Troubleshooting Steps

1. Error Code E01

This error code indicates a water supply issue.

Troubleshooting Steps:

• Check that the water supply valves are fully open.
• Inspect the inlet hoses for any kinks, twists, or clogs.
• Ensure the hoses are connected securely to both the machine and water supply.
• Make sure the water pressure is sufficient.
• If the issue persists, the inlet valve may be faulty and need replacing.

2. Error Code E02

This error code suggests a drain problem.

Troubleshooting Steps:

• Verify that the drain hose is not kinked or clogged.
• Ensure the drain hose is positioned correctly without any blockages.
• Check for any foreign objects inside the pump's filter or impeller that may obstruct the drainage.
• If the pump appears to be faulty, it might need to be replaced.

3. Error Code E04

This error code indicates an issue with the door lock.

Troubleshooting Steps:

• Inspect the door lock for any visible damage or loose connections.
• Ensure the door is properly closed and aligned.
• Check the door lock switch functionality by testing it with a multimeter.
• If the door lock mechanism is faulty, it may require replacement.

4. Error Code E06

This error code suggests a problem with the motor control board.

Troubleshooting Steps:

• Turn off the washer and unplug it from the power source.
• After a few minutes, plug the washer back in and restart it.
• If the error code persists, the motor control board might need to be replaced.

5. Error Code E13

This error code indicates a water leak measurement problem.

Troubleshooting Steps:

• Verify that the washer is level and properly balanced.
• Check the sensor connections and wiring for any loose or damaged parts.
• If the issue continues, the water level sensor might need replacement.

Note: If you encounter any other error codes or if the troubleshooting steps do not resolve the issue, it is recommended to consult the user manual or contact Asko customer support for further assistance.