What are the fault codes for Asko washing machines?

What are the fault codes for Asko washing machines? - Expert Article

What are the fault codes for Asko washing machines?

Asko washing machines are known for their exceptional performance and reliability. However, like any other appliance, they may encounter issues or faults during their lifespan. Understanding the fault codes displayed by your Asko washing machine can help diagnose the problem and determine the necessary actions to resolve it.

Common Asko Washing Machine Fault Codes

Here are some of the most frequently encountered fault codes in Asko washing machines:

1. Er1: Water inlet error
2. Er2: Drainage error
3. Er3: Overfilled or oversudsing error
4. Er4: Unbalanced load error
5. Er5: Door unlocking error
6. Er6: Motor error
7. Er7: Triac short-circuited error
8. Er8: Thermistor error
9. Er9: Communication error
10. Er10: Water leakage

Troubleshooting Tips for Common Fault Codes

1. Er1: Water inlet error

This code indicates a problem with the water intake. Check if the water supply is turned on and the hoses are not kinked or blocked. Ensure that the filters in the hoses and the machine inlet valves are clean. If the problem persists, it may be due to a faulty inlet valve that needs replacement.

2. Er2: Drainage error

An Er2 code means there is an issue with the drainage system. Check the drain hose for any clogs or kinks. Ensure that the drain pump is functioning correctly and there is no obstruction in the pump or filter. If the problem persists, the drain pump or control board may require professional assistance.

3. Er3: Overfilled or oversudsing error

This fault code indicates that the machine has detected an excessive amount of water or detergent. Make sure not to overload the machine or use excessive detergent. If suds are present, run a rinse cycle to remove them. If the error persists, there may be a problem with the pressure switch or control board that needs to be addressed.

4. Er4: Unbalanced load error

An Er4 code suggests that the load is not evenly distributed inside the drum. Ensure that the laundry is evenly arranged and not tangled. Reloading the machine and redistributing the load should resolve the issue. In some cases, an unbalanced load may indicate a problem with the suspension system or shock absorbers, requiring professional attention.

5. Er5: Door unlocking error

If the door fails to unlock, an Er5 code is displayed. Try resetting the machine by disconnecting it from the power supply for a few minutes. If the door still doesn't unlock, there might be an issue with the door lock mechanism or control board that requires professional assistance.

6. Er6: Motor error

An Er6 code indicates a fault in the motor or motor control system. Ensure that there are no blockages or obstructions in the drum that could hinder the motor's movement. If the problem persists, it is recommended to contact a technician to inspect and repair the motor or control system.

7. Er7: Triac short-circuited error

This code indicates a problem with the power relay. It often suggests a fault within the control board or the triac itself. Professional assistance is required to diagnose and repair the issue.

8. Er8: Thermistor error

An Er8 code suggests an issue with the temperature sensor. Ensure that the sensor is clean and securely connected. If the problem persists, it may be necessary to replace the thermistor or seek professional help.

9. Er9: Communication error

When an Er9 code appears, it signifies a communication problem between the control board and other components of the machine. Check the connections between the control board, display panel, and other modules. If the error persists, the control board or related components may require inspection or replacement.

10. Er10: Water leakage

If a water leakage is detected, an Er10 code will be displayed. Investigate the source of the leak, paying attention to the hoses, connections, and seals. For safety reasons, it is advisable to contact a professional technician to assess and repair the leakage issue.

It is important to note that these fault codes may vary slightly depending on the model and year of your Asko washing machine. Consulting the user manual or contacting Asko customer support can provide specific and accurate information for your particular machine.

Remember, if you're unsure about performing any troubleshooting or repair tasks, it is always recommended to seek professional assistance to avoid any further damage to your appliance.

By understanding the fault codes and following the troubleshooting tips mentioned above, you can effectively diagnose and resolve common issues in your Asko washing machine, ensuring its optimal performance for years to come.